Roller

1·Its technical expertise is available to provide laser, tyre, roller and girth gear.

其技术专长是提供激光、轮胎、辊和环齿轮。

2·On leaving the dryingmeans 8, the strips are sent on a descending path by means of rollers 9, 109and go from the last of these rollers to the first roller of the downstreampulling group A'.

离开干燥装置8以后，丝条经由辊9 109沿下降路径被输送，最后到达下游牵引组A’的第一个辊。

3·The chain drive consists of a duplex roller chain which drives both intake and exhaust camshafts.

链条驱动机构包括一条双排辊链，通过它来驱动进气和排气凸轮轴。

4·This permits the roller set to align freely in the outer-ring raceway, thus compensating for misalignments and shaft deflections (see Figure 1.43).

这允许设置为自由对齐辊在外圈滚道，从而为失调和轴挠度进行补偿(见图1.43)。

5·The specific method is the belt roller group to which side, which side of the belt toward the direction of forward or backward on the other side.

具体方法是皮带偏向哪一侧，托辊组的哪一侧朝皮带前进方向前移，或另外一侧后移。

1·The effecting factors of grinding field temperature were analyzed. The law of roller surface layer 's temperature was researched.

系统分析了影响磨削区温度的因素，探讨磨削轧辊表层温度的分布规律。

2·The quality of roller directly effect welded pipe quality.

焊管轧辊质量直接影响着焊管产品的质量。

3·Crush fast, seal entire journey, improve the working environment, adopt the stainless steel roller, use the special tooth shape and special processing craft, enhance the smashing quality.

粉碎速度快，全程封闭，改善工作环境，采用不锈钢制轧辊，采用特殊齿形和特殊加工工艺，提高粉碎质量。

4·This article introduces a roll eddy current detecting operating principles, equipment composition, functions and the role and effectiveness of roller.

介绍了轧辊涡流检测设备的工作原理，设备组成，功能以及在轧辊方面的作用和效果。

5·This paper introduced the NC programing method and its skill with the example of the NC machining of the roller part.

本文以轧辊零件的数控车削加工为例，介绍弧形零件的数控编程方法和技巧。

1·Lie on the roller with your knees bent and your feet on the floor, so the roller extends along your spine from your sitting bones to the top of your head.

双膝弯曲，两脚着地，躺在这个滚筒上，让它沿着你的脊柱，一直从尾骨到头顶。

2·Paintbrush, paint roller of little barrel must be brand new.

刷漆用的滚筒、装油漆的小桶必须是全新的。

3·Should avoid excessive paint brush or roller coated.

应避免漆刷或滚筒沾上过量涂料。

4·It consisted of a granite trough, with a roller, normally constructed of the same material, which pushed the warm liquid chocolate backwards and forwards for several days.

它由一个花岗岩槽和一个通常是相同材料的滚筒组成，后者将暖乎乎的巧克力流体来回辗压数天时间。

5·More than 20 tinted rotary screen printing machine have been produced, this printing method is slowly replacing roller printing.

超过20套色的圆网印花机也已经生产出来，这种印花方法正慢慢取代滚筒印花。

1·Our product lines include FR black out fabrics; linen, cotton and polyester fabrics for vertical, roller and pleated blinds .

我们的产品线包括法国涂黑织物；亚麻，棉和涤纶织物纵向，滚轴和折叠窗帘。

2·Conveyer can be classified according to the conveying form into chain conveyer, belt conveyer, twist conveyer, roller conveyer, vibration conveyer buckets conveyer and so on.

输送机按输送方式可以大致分为链状输送带、皮带输送带、螺旋状输送、滚轴式输送、振动输送和吊桶式输送等多种输送机。

3·Series GS roller screen which screen face is a plane and all obliquities have the same angle.

GS 系列滚轴筛，平面筛面，筛面呈一个角度，结构简洁，筛分物料流畅，占地空间小。

4·Protective clothing - Wrist, palm, knee and elbow protectors for users of roller sports equipment - Requirements and test methods.

防护服。滚轴运动设备使用者用腕部、掌部、膝部和肘部防护装置。要求和试验方法。

5·At the statement Of preparation, working and dormant, the machine will clean the roller automatically so that avoid agent being crystal.

在预备、工作和待机节能状态时，机器自动清洗滚轴，有效防止药液结晶。

1·Using the reliability design method based on mathematical statistics theory, the reliability problem on calender roller rigidity was discussed in this paper.

应用建立在概率统计理论基础上的可靠性设计方法，探讨了压延机辊筒刚度的可靠性问题。

2·Open rubber mixing machine for. Rubber factory is used for the preparation of plastic rubber, rubber or heat refining, a type of roller exposed rubber machinery.

开放式炼胶机的简称。橡胶工厂用来制备塑炼胶、混炼胶或进行热炼、出型的一种辊筒外露的炼胶机械。

3·Strong adhesion, high shear resistance, no residue left when removed, using structural separating paper. It's used for mounting photo sensitive resin plate on printing roller or resin sleeve.

高粘性，高抗剪切力，揭处不留残胶，使用结构型离型纸，固定感光树脂版于印刷辊筒及树脂套筒上。

4·Brushing: stir before construction can be diluted with water. With roller, brush, spray gun construction 1 to 2 times.

涂刷：施工前应充分搅拌，可用水稀释。使用辊筒、刷子、喷枪施工1至2遍。

5·The high or low of surface temperature of roller and the big or small of steam wastage is decided by the good or bad of steam condensation and draining system of stretch machine.

牵伸机的蒸汽冷凝疏水系统的优劣决定了辊筒表面温度的高低和蒸汽消耗量的大小。

1·Incorrect setting of top roller cleaners, or worn cleaners.

上罗拉清洁器隔距不正确或破损。

2·Feed roller is driven by an electronic frequency converter which permits stepless variation of its speed and is controled to be synchronized with doffer by the computer.

给棉罗拉采用调频电机传动，实现无级变速，通过计算机控制与道夫传动同步。

3·Steady control problem of lubrication rate on acrylic fiber is explored in view of equipments such as finishing oil pump, pressing roller and steel roller.

从油剂泵、皮辊和钢罗拉等设备构件运行状态考虑，探讨了腈纶纤维上油率的稳定控制问题。

4·Improperly clothed top roller cleaners.

上罗拉清洁器包的绒布不当。

5·This paper deals with the feed mechanism of ramie roller card and its effect in carding quality.

本文对苎麻罗拉梳麻机的喂给机构与梳理质量的关系进行了讨论。

1·Main production roller, chain and various kinds of machinery and equipment stained.

主要生产托辊、链条及各类染色机械设备。

2·It points out that the position of the maximum strain, stress and tension is at first group trough type roller, not at passing poion of pulley if the head drum works as pulley.

指出在头部滚筒作为驱动滚筒的布置系统中，胶带最大应变、力及张力位置不在驱动滚筒相遇点，而在过渡段第一组槽形托辊处。

3·Spiral roller: Used to remove the sticky material on the conveyor belt, to keep an area clean.

螺旋托辊：用于清除输送带上的粘料，保持带面清洁。

4·The product has been national patent, the company produced high-strength ceramic sealed roller to domestic industry, the use of conveyor belt, there have been users alike.

该产品已获国家专利，公司生产的高强度密封式瓷质托辊以国内各行业的皮带运输机上使用后，受到用户一致好评。

5·The automatic carrying roller rack corrector has simple structure, low cost and good correcting effect.

该托辊支架全自动纠偏装置结构简单，成本低，纠偏效果好。