Milling

1·Most milling machines are equipped with power feed for one or more axes.

大部分机器都配备了铣削力的一个或多个轴的饲料。

2·Thee difficult part about the milling is that you will have to do this also in the other half of the mould and there everything should be mirrored.

困难的一部分，约铣削的是，你将不得不这样做也有另一半的模具和有一切应镜像。

3·As far as the direction of cutter rotation and workpiece feed are concerned, milling is performed by either of the following two methods.

至于涉及到铣刀转动的方向和工件的进给，铣削可以通过下列两种方法之一进行。

4·Pixel spacing should be small enough to allow a proper overlapping between the adjacent pixels so that a smooth uniform profile can be fabricated using FIB milling.

像素间隔应小到可以允许相邻像素有合适的重叠，使FIB铣削可以制造光滑均衡的轮廓。

5·Milling is a machining process that is carried out by means of a multiedge rotating tool known as a milling cutter.

铣削是采用被称为铣刀的多刃旋转刀具完成的机加工作业。

1·By this stage we were creating quite a road side circus with people milling around to watch the action.

通过这一阶段，我们正在创造不少道路与周围的人铣边观看马戏的行动。

2·The company has introduced advanced foreign CNC lathe, machining center and car milling compound machining center and the CMM measuring instrument etc, for employees to provide a good platform.

公司先后引进国外先进的数控车床、加工中心、车铣复合加工中心以及CMM测量仪器等，为员工提供一个良好的工作平台。

3·Set up and operate machine tools to perform repetitive machining operations, such as turning, milling, drilling, boring, planing, honing, broaching, grinding or other machining operations.

安装和操作机器工具来执行反复加工操作，如车，铣，钻，镗，刨，珩磨，拉削，磨削或其他加工业务。

4·Including: Sawing, punching, turning, drilling, tapping, milling, polishing, wire-drawing, CNC processing, bending, forming and other deep processing, argon arc welding and assembly.

包括：锯切、冲压、车削、钻孔攻丝、铣、焊接、抛光、拉丝、数控加工、弯曲、成型等深加工、氩弧焊接、装配。

5·Therefore, in the milling back trenching session should note the following points.

因此，在铣背拉槽环节中应注意以下几点。

1·Store the quicklime and gypsum in the tank after crushing and ball milling.

生石灰、石膏经过破碎、球磨后进入料仓储存待用；

2·Lactic acid is produced (via starch fermentation) as a co-product of corn wet milling.

乳酸产生(经淀粉发酵作为共同的玉米产品)湿磨。

3·Effect of disperse of nanosized titanium oxide in water was improved by sand milling, and measured by sedimentation experiments.

通过砂磨提高纳米二氧化钛在水中分散的效果，并用沉降实验测定了分散情况。

4·The influence of ball milling time on hydrogen storage performance was also investigated.

研究了材料的组成和球磨时间对吸放氢性能的影响。

5·Through the analyse on the current situation separation process of coarse slime, a new floatation technology about coarse slime separation after rod milling was presented.

通过粗煤泥分选工艺的现状分析，提出对粗煤泥经棒磨后进行浮选的新工艺，并对某厂的粗煤泥进行了可行性试验。

1·Expounds the basic principle of cutter radius compensation, and how to apply the cutter radius compensation in nc milling as well as some matters needed attention.

阐述刀具半径补偿的基本原理和在数控铣削加工中刀具半径补偿的应用及使用时应注意的问题。

2·The function of cutter radius compensation is an important function in nc milling.

刀具半径补偿功能是数控铣削加工中的重要功能。

3·A milling method of curves in space is introduced in the paper, which can be applied to the processing of space circular, elliptic and other curves on various cylinders.

本文介绍了一种空间曲线轨迹的铣削加工方法，适用于加工各种圆柱面上的空间圆形、椭圆形，以及一些其它形式的曲线轨迹。

4·Compared with the high-speed milling, the surface with fine and complicated shape is difficult to eliminate the alloy EDM shaped mold manufacturing advantage.

与高速铣削加工相比，在表面带精细复杂形状和电火花加工难以省去的合金异型模具制造方面占有优势。

5·The use of cryogenic nitrogen gas jet to reduce the temperature of cutting zone and to avoid oxidation wear of tool in high speed milling titanium alloy was presented.

为降低切削区温度、防止刀具的氧化磨损，提出在低温氮气射流条件下进行钛合金的高速铣削加工。