1·If there is a leak, have an auto mechanic replace any problematic gaskets or oil seals.
如果发动机漏油，则让一个汽车技工更换掉所有有问题的垫圈和盖子。
2·Clean gaskets and bird with Mr. Magic Countertop.
干净的垫圈，鸟和神奇先生的工作台。
3·In addition, the media must be delivered with the system of sealed, gaskets, rubber hoses and other materials have compatible, if the two incompatible, then you must re-transmission medium.
另外，所要输送的介质必须与系统中的密封、垫圈、软管等橡胶材料具有相容性，如果两者不相容，那么就得重新确定输送介质。
4·Compatible with compressor seals, gaskets, hoses, and air system components.
与压缩机密封，垫圈，软管，及空气系统组件相容。
5·The 18-8 inlay is not required for graphite gaskets.
对于石墨垫圈来说，并不需要18-8嵌体。
1·If want to use metal gasket, it should be smooth surface narrowed, make its and gaskets of contact area is reduced.
如果要用金属垫片，则应将光滑面缩小，使其与垫片的接触面积减小。
2·ANSI flange sealing principle is very simple: bolt two seal face mutual extruding flange gaskets and formed the seal.
ANSI法兰的密封原理极其简单：螺栓的两个密封面相互挤压法兰垫片并形成密封。
3·To soft gaskets, flange surface too smooth adverse instead, because right now happened resistance smaller.
对软质垫片，法兰面过于光滑反而不利，因为此时发生界面泄露阻力变小了。
4·Interface leak So, gaskets are different, the requirements of the flange surface roughness is not the same.
所以，垫片不同，所要求的法兰表面粗糙度也不相同。
5·The number and type of gaskets is identical to that of the B-200 motor, except having a larger diameter.
的数量和类型垫片是相同的表示，在该B - 200型汽车，除了有一个直径较大。