同时采用复合消磁器连接方式控制消磁效果，实现彻底消除材料剩磁。
若材料本身的磁熵变数值较大，则退磁场的影响相对较小。
还可拔去消磁线圈插头，检查一下消磁热敏电阻有无短路性故障，如有应换新。
宽度越小，元件中的边缘退磁场越大，在外磁场下的磁化反转也越困难。
将上述原料清理、去磁、粉碎、按上述比例配料、混合、包装而成。
实现对充、退磁过程的智能化控制，剩磁强度的在线测量及校正；
1·The conventional demagnetizing method is not good at inner demagnetization using direct or alternating magnetic field.
常规的交、直流消磁方法对材料内部消磁效果欠佳。
2·It can accurately judge an interference signal by sampling and analyzing the demagnetization signal, thus able to accurately judge the demagnetizing circuit in the color TV set is normal.
通过对消磁信号进行采样及分析，可以准确的辨别是否为干扰信号，从而可以准确判断出该彩电内的消磁信号是否正常工作。
3·The reason of magnetic deflective blow when high pressure vapor pipe is magnetized and welded is analyzed. A new simple demagnetizing weld is introduced.
分析了高压蒸汽管线带磁及焊接时产生磁偏吹的原因，介绍了简易消磁焊接新方法。
1·It is pointed out that there is a far cry between the calculated demagnetizing factor and the value listed in the teaching book.
指出按公式计算的退磁因子与教材中列举的数值相差较大。
2·Ithas achieved the intelligent control of the process of magnetizing and demagnetizing, on-line measurement and calibration.
实现对充、退磁过程的智能化控制，剩磁强度的在线测量及校正；
1·A self reset type button is arranged to control the demagnetizing operating program and the detecting operating program.
设置了自复位式按钮控制去磁和检测两个操作程序。