included angle

夹角:两条线段之间的角度关系。
常用释义
夹角:两条线段之间的角度关系。

扩展信息

夹角
数学常用英文词汇_百度文库 ... straight angle 平角 included angle 夹角 2、所有的三角形 equilateral triangle 等边三角形 ...
包含角
机械制图全部符号及表示含义 - 豆丁网 ... Imprint 压印 盖印 included angle 包含角 夹角 infinite lines 无限长线 无限长直线 ...
包容角
包容角Included Angle)的定义:包容角又称大王销角是轮轴与其悬挂组合成的固定机械结构角度。包容角改变是造成后倾角…
刀刃角
机械专业英语词汇(很全) - Lemon Tree ... hook angle 勾角 included angle 刀刃角 index head 分度头 ...
坡口角度
焊接术语 - 豆丁网 ... 坡口面角度 angle of bevel (美国) 坡口角度 included angle (美国) 坡口高度 groove depth ...
包含的角
UG中英文对照H-L_生活乞丐_新浪博客 ... Include|包含 Included Angle|包含的角 Incomplete|不完整(的) ...
软金属时钻头夹角
(B)17〃钻软金属时钻头夹角(Included Angle)应为下列何者?
内外倾总角
汽车行业英文词... ... inclined overhead valve 倾斜上置式气门 included angle 内外倾总角 increased rollover risk 翻车风险高 ...

例句

in addition, the user also can use the included angle between the graduated stick and the long side of the ruler to draw various angles.

另外,使用者还可利用标杆和直尺长边的夹角来绘制各种角。

On the horizontal projection plane, an included angle is formed between the thrusting bars and the longitudinal center line of the axle.

在水平投影面上,推力杆与车架纵向中心线之间具有夹角。

The device is characterized in that two adjacent contact ends of the suite are connected with the included angle changeability.

所述的套件两两相邻接触端为一可变夹角相接。

This included angle, from port Alexander to Mr Thain of meridian arc length between two of the central angle.

这个夹角,就是从亚历山大港到塞恩两地间子午线弧长所对应的圆心角。

According to quantified standard data, the closed degree of between stylebooks was computed with cosine of included angle.

据标准化数据用夹角余弦计算样本间的贴近度。

the included angle which is formed by the rocker (4) and the lower handle (6) is provided with a torsional spring of an outer arm (5).

摇杆(4)和下手柄(6)所形成的夹角内设有外臂扭转弹簧(5)。

The wedge roller forms an isosceles triangle with an included angle of 178-179 degrees in the radial direction.

所述的楔形辊在径向形成一个等腰三角形,其夹角为178-179度。

使用夹角余弦取代欧氏距离,作为判别相点间相关性的标准;

可变包含角单色器的双轴平行度误差分析和测试

脊柱运动枢纽的研究--椎体与下关节突关节面夹角测量及整脊法原理探讨

两向量夹角的一个公式及其应用

梯形槽O形橡胶密封圈夹角对最大接触应力影响研究

光轴与光线轴夹角的数学表示

对铰链四杆机构极位夹角定义问题的探讨

平面连杆机构的极位夹角与设计方法的研究

关于平面连杆机构极位夹角的定义

曲线描述的一种方法:夹角链码

基于夹角的二维凸包改进算法

基于夹角余弦的油浸式变压器故障诊断研究

included angle with level line

与水平线夹角