转动轴用轴套安装组合件涉及固定安装在转动轴上的护轴轴套领域。
轴承内圈为方便安装在滚道处分为两部分：内圈体和轴套。
应用DEFORM软件，对JX1030半轴套管体镦粗—反挤压成形过程进行了模拟分析。
且于该轴套两侧端分别向外延伸形成第一凸片及第二凸片；
1·The shaft sleeve and mechanical seal can be replaced without removing the shaft from the pump.
轴套和机封的更换不必将轴从泵上拆下来。
2·Regularly check the wear of pipe shaft sleeve , wear in time after a larger replacement.
定期检查管道泵轴套的磨损情况，磨损较大后应及时更换。
3·The upper end of the lifting rod is provided with the shaft sleeve and a button which are connected with the eccentricity handle.
提升杆上端装有与偏心把手连接的轴套和按钮。
4·The main parts of pump are pump casing, pump cover, impeller, shaft, shaft sleeve and supporting parts.
主要由泵体、泵盖、叶轮、轴、轴套和支承部分构成。
5·The main parts of pump are pump casing, pump cover, impeller, shaft, sealing ring, shaft sleeve, bearing and shaft seal etc.
泵主要由泵体、泵盖、叶轮、轴、密封环、轴套、轴承、轴封等零件组成。