deoxidization

1·Cyclic voltammetry curve showed obvious oxidation and deoxidization peaks, corresponding to the flats of charge and discharge.

循环伏安曲线出现明显的氧化还原峰，并分别与充、放电电位平台相对应。

2·The effective use of transform catalyst during the methanol production is discussed in this article from the catalyst loading, oxidation, deoxidization, etc.

从催化剂的装填及催化剂的氧化还原等方面探讨了如何高效使用甲醇转化催化剂。

3·In the presence of soft-template such as PVP, PVA and CTS, Ag nanoparticles with different morphologies were prepared through liquid phase chemical deoxidization method.

在聚乙烯醇（PVA）、聚乙烯吡咯烷酮（PVP）和壳聚糖（CTS）等软模板存在下，通过液相化学还原法制备出各种形貌的银纳米粒子。

4·Research the start-up process of UASB reactor and the differ factors' infection to the sulfate deoxidization.

采用自行设计的UASB反应器，考察反应器的启动过程和不同因素对硫酸盐还原效果的影响。

5·The method of chemical deoxidization was used to treat electroplating wastewater which contains chromium ions, and sodium pyrosulfite was used as reducing agency.

采用化学还原法处理含铬离子污水，焦亚硫酸钠作还原剂。

1·The effect of Re element addition on the nitrogen content in the weld was insignificant due to the oxidization from the early deoxidization stage.

而由于稀土元素在先期脱氧中大量氧化，其脱氮效果较弱，稀土元素对熔敷金属的总含氮量的影响不显著。

2·This paper introduces the experiments of deep deoxidization and desulphurization in ladle with carbonaceous synthetic slag.

介绍了用低碳合成渣在钢包中深脱氧和深脱硫的工艺试验。

3·The shape and behaviour of non-metallic inclusions in the billets are influenced by degree of deoxidization during steel making process.

生产过程中钢液的脱氧程度决定了钢中非金属夹杂物的形态和行为，直接影响到钢的冶炼品质。

4·By adopting the vacuum carbon deoxidization process, the conformity ratio of steel in ultrasonic detection test is improved under the precondition of significantly reducing production costs.

通过采取真空碳脱氧的工艺，可以在较大的降低吨钢生产成本的前提下，提高钢板探伤合格率。

5·The test of LF-80 deoxidizer on ladle furnace is analyzed, which shows that it can replace aluminum shot and calcium carbide from deoxidization result.

本文主要对LF - 80脱氧剂在包钢钢包炉上的试验情况进行了总结。从试验结果看，其完全可以替代铝粒和电石的脱氧效果。