Superalloys

超合金

常用释义

n. 超合金；超耐热不锈钢（superalloy 的复数）

扩展信息

高温合金

飞机结构制造英汉词汇 - 豆丁网 ... 包铝薄板 alclad sheet 高温合金 superalloys 淬火 quench ...

超合金

超合金(Superalloys) 钛(Titanium) 贝氏体(Bainite) 马氏体(Martensite) 魏氏体(Widmanstätten ferrite) 铸铁(Cast iron) 焊接(Wel...

超级合金

WorldWideScience.org Topics : S ... sunspots( 黑子) superalloys( 超级合金) supercapacitors( 超级电容器) ...

例句

The applications of spray forming of nickel base superalloys and its development and current status are reviewed in this paper.

本文综述了喷射成形技术在涡轮盘用镍基高温合金中的应用及其发展与研究现状。

The service condition and superalloys for combustion chamber of gas-turbine engines have been introduced.

介绍了涡轮发动机燃烧室材料的使用条件和国内外采用的高温合金材料；

Among these superalloys, nickel-base superalloys are widely used as thermal components in the turbojet engine.

涡轮喷气发动机各种热部件使用的材料中镍基高温合金占有很大比重。

According to formation process, superalloys are divided into deformation alloy, precision casting alloy and powder alloy.

根据形成过程，分为变形高温合金合金，精密合金，粉末合金铸造。

The effects and mechanisms of phosphorus on Fe Ni based wrought superalloys are reviewed.

综述了磷对铁镍基变形合金的影响及机理。

According to base element, Superalloys are divided into Fe-base, Ni-base and Co-base alloys.

根据基元，超合金可分为铁基，镍基，钴基合金。

Application of Artificial Neural Network to Predicting Creep Rupture Life of Nickel-base Superalloys

人工神经网络法在镍基变形合金蠕变断裂寿命预测中的应用

Computer Detection and Analysis of Solidification Parameters During HRS Directional Solidification of Single Crystal Superalloys

单晶高温合金HRS定向凝固过程凝固参数的计算机检测与分析

Thermodynamic Analysis of the Reaction of the Nb Silicide-based Superalloys with Oxide Coatings for the Graphite Crucibles

铌硅化物基超高温合金与石墨坩埚氧化物涂层反应的热力学分析

Stress and Strain Analysis of Double Shear Creep Specimen and Its Application in Nickel-base Single Crystal Superalloys

双剪切试样的应力应变分析及其在镍基单晶超合金上的应用

Study of Compression Fatigue Mechanism of Ni-Based Powder Metallurgy Superalloys

镍基粉末冶金高温合金的压缩疲劳性能研究

Carbon Deposits on the Surface of Superalloys from Jet Fuel

喷气燃料在合金表面的碳沉积

Electromagnetic Soft-contact Confinement and Directional Solidification of Near-net Shape Blade Castings of Superalloys

高温合金叶片类铸件电磁软接触成形过程研究

Electromagnetic soft-contact confinement and directional solidification of near-net shape castings of superalloys

高温合金电磁软接触近净成形定向凝固研究

On the Validation of Rafting Law and Creep Life of Nickel-base Single Crystal Superalloys under Multiaxial Stress States

镍基单晶合金筏化规律及蠕变持久寿命模型在复杂应力状态下的考核

Meso Approaches for the Creep Damage Behavior of Nickel-Base Directionally Solidified Superalloys

镍基定向结晶合金蠕变损伤的细观模型

Progress in Preparation and Application of Corrosive Resistance Coating for Aerospace Superalloys

航空用高温合金防护涂层的研制及其应用的新进展

Constitutive Relationship of Nickel-base Single Crystal Superalloys and Applications

单晶涡轮叶片材料本构模型及应用研究

Electromagnetic confinement and solidification control of Ni-base superalloys under vacuum

镍基高温合金真空电磁约束成形与定向凝固

Low-Cycle Fatigue Life Prediction of Single Crystal Nickel-Based Superalloys under Asymmetrical Cyclic Loading

非对称循环载荷下镍基单晶合金低周疲劳寿命预测

Prediction of Thermal Expansion Coefficients for Low Thermal Expansion Superalloys

低膨胀高温合金线膨胀系数的预测

Electrolytic Extraction of Phases From Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte

用盐酸甲烷电解质从镍和镍铁积超热合金中进行相位的电解提取

Casting Microporosity Growth Simulation in Single-Crystal Superalloys

单晶高温合金中铸造微孔洞的扩长

A Low-Cycle Fatigue Life Model for Simplified Turbine Disk Simulation Specimens of Powder Metallurgy Superalloys

粉末冶金涡轮盘简单模拟件低周疲劳寿命研究

The influence of cobalt, tungsten, and titanium on the as-cast microstructure of single crystal nickel-base superalloys

钴，钨和钛对镍基单晶高温合金铸态组织的影响

Prediction on the oxidation resistance of Ni-based superalloys by multiple linear regression analysis

用多元线性回归法预测镍基高温合金的抗氧化性

Predicting Grain Size of Wrought Superalloys Forging Using Fuzzy Mathematics

应用模糊数学预测变形高温合金锻件晶粒度

Effects of Re on stress rupture properties of single crystal superalloys at elevated temperature and high stress

Re对单晶高温合金高温高应力持久性能的影响

The Establishment of Constitutive Relationship fWrought Superalloys by Artificial Neural Network or

人工神经网络在建立变形高温合金本构关系中的应用

Recast layer formed by laser drilling of Ni-based superalloys and progress on its control

镍基超合金激光打孔再铸层及其控制研究进展