1·Fewer workers are needed to solder circuit boards.
焊接电路板需要较少的工人。
—— 《柯林斯英汉双解大词典》
2·This makes for the best solder job.
这是为了使焊接至臻完美。
3·They forget to solder the contacts.
他们忘了焊接那些触片。
4·In the test the solder ability plating coating.
在测试电镀镀层的焊锡能力。
5·Equipment specifically designed for use with solder paste.
于专为锡膏设计的设备中使用。
6·Becareful not to overheat the solder and damage the diodes.
注意不要使烙铁过热而损坏二极管。
7·Before you solder, make sure that the pipes fit together properly.
焊接之前，要确认管子是否般配。
8·Solder the power wires, positive and negative battery contacts.
焊锡线的力量，积极和消极的电池接触。
9·Carefully solder 2 new thin, flexible, insulated wires in place.
小心的将两条细、易弯曲并且绝缘的新导线焊接到位。
10·Will the sample needs of solder part in flux in 5 to 10 seconds.
将样品需要焊锡的部分浸入助焊剂中5到10秒。
1·Each sculptural planter is made-to-order with handmade glass and lead-free solder and comes with everything you need but the plants.
每个艺术花盆都是定制的。它们由手工制作的玻璃和无铅焊料接合而成，交付使用时，万事俱备，只欠花卉。
2·I chose to place, and solder, a lot of the components all at once.
我选择的地方，和焊料，在一次所有组件很多。
3·This paper describes the reliability evaluation and analysis technology of Pb-free solder mounting components, to meet customer's need of electronics and automobile industries scale.
概述了无铅焊料安装元件的可靠性评价和解析技术，以满足电子和汽车工业领域的顾客需要。
4·Resist: coating material used to mask or to protect selected areas of a pattern from the action of an etchant solder or plating.
阻剂：用来选择性保护某图形区域免受蚀刻剂，焊料或电镀影响的涂层材料。
5·Research progress of lead-free solder, invalidation models of solder joint, solder joint reliability evaluation and the defects of solder joints in recent years have been reviewed.
笔者就近年来国内外开发的无铅焊料、焊点的失效模式、焊点可靠性评价方法和焊点的主要缺陷进行了综述；
1·You can either solder them together properly with a metal strip on the front, or just try positioning the metal correctly inside the case with the cells.
你可以使用前面的金属条将他们焊在一起，或者只是定位好电池盒里面的电池单元的金属条。
2·This may seem like a con, but because anyone can solder anything to the pads, it makes the unit pretty universal.
这似乎是一个反面的，而是因为任何人都可以在任何焊垫，它使单位相当普遍。
3·Joints between reinforcement members can be made satisfactorily with tin solder.
锡焊能够满意地做成加筋构件之间的接头。
4·Components required to be mounted off the board are provided with lead forms at the board surface or other mechanical support to prevent lifting of solder land.
需要离开线路板安装的组件在线路板表面利用引脚形状或其它机械支撑来防止焊盘的翘起。
5·Reflow Soldering: Melting, joining and solidification of two coated metal layers by application of heat to the surface and predeposited solder paste.
回流焊：应用加热金属涂敷层的表面和预涂焊膏，熔融，连接和凝固两个金属涂层。
1·Fewer workers are needed to solder circuit boards.
焊接电路板需要较少的工人。
—— 《柯林斯英汉双解大词典》
2·But, no matter how simplistic this design is, you will still have to solder copper pipe joints if you want to tap into your existing hot water system.
但是，这个设计无论多么简单，你总得要焊接铜管，以便接入你现有的热水供应系统。
3·Before you solder, make sure that the pipes fit together properly.
焊接之前，要确认管子是否般配。
4·They forget to solder the contacts.
他们忘了焊接那些触片。
5·At this stage, it's easy to remake a solder connection if there is a problem.
在这一阶段，如果存在问题，可以很容易地改造焊接的连接点。
1·The execution of the liquid photoimageable solder mask of the printed circuit board was briefly introduced. The process and its quality control were also illuminated.
本文对印制板液态感光成形阻焊剂的制作进行了简单介绍，对该制程的工艺过程和品质控制进行了较为详细的论述。
2·Basic 2-d transmission X-ray systems are typically used to analyze solder joints on single-sided boards.
基本的第2个传输X -射线系统在单边的委员会典型地用于分析焊剂联接。
3·The injection stream welding plant comprises a clamp, a soldering flux generator, a preheater, a solder groove with a first-level spout, a voltage-stabilizing filter and a nozzle;
本发明包括夹具、 助焊剂发生器、预热器、具有一级喷口的焊剂槽、稳压滤波器、喷嘴；
1·The mould component can be used for testing exothermic solder molten metal mobility.
该模具组件可以用以测试放热焊接剂熔化金属流动性。