1·Put the absorbent cotton back into the tube, counterclockwise screw the tube on the cover tightly.
将吸透水的吸水棉放进套管内， 将套管逆时针方向旋紧在顶盖上。
2·Some riders put a dab of nail polish on the binding's screw threads to help keep the screws in place.
有一些滑雪者会往固定器的螺丝上涂上指甲油保证螺丝不会松动。
3·As to the problems of bearing disable, the mend method on seal structure of the screw conveyer for powder materiel is put forward, and the applied effect is demonstrated.
针对粉状物料螺旋输送机轴承损坏问题，提出了轴承密封结构的改进措施，说明了改进后的应用效果。
4·This article focused on analysis of the tension screw on the quality of concrete in the shear wall and put forward some specific proposal measures.
本文就重点就对拉螺杆对剪力墙混凝土质量的影响进行分析，提出了几点针对性的建议措施。
5·Failure is more common with the screw put on the Bellows Seal Valves threaded stem wear, so that the valve can not close.
比较常见的故障是阀杆与螺套上的丝扣磨损，陶瓷阀门使阀门无法关闭。
6·The positive pressure distribution on the bearing surface of screw down system of 950 primary mill was studied using FEM and the corresponding improvement way has been put forward.
通过有限元分析，研究了950开坯机压下系统球面轴承表面正压力的分布情况，并据此提出了相应的改进措施。
7·Based on the idea of spool's two degree of freedom motion authors put forward a new concept of servo screw.
在阀芯双运动自由度的基础上提出了一种流体伺服螺旋的概念。
8·Some solutions are put forward by analyzing reasons of burning loss for the screwdown screw and nut on steckel mill.
通过对炉卷轧机的压下螺丝与螺母烧损的设备事故现象的分析，找出事故产生的原因，并提出了相应的解决方案。
9·The person on the car, and then on the brake pedal is motionless, the car under put irritating to repeat the process until the brake fluid flip so far no air, then loaded back to screw.
车上的人了，然后踩刹车踏板一动不动，车下的放刺激性重复这个过程，直到制动液翻转到目前为止没有空气的时候，然后装回螺丝。
10·On completing of the wire plugging, put the function items into the matching installation bottom cases respectively, and tighten the installation screws on the screw holes.
接好线的功能件放入与之匹配的安装底盒，通过安装螺丝孔拧紧安装螺丝固定。