1·The pump body, Vane wheel and water distributor are made of stainless steel.
主机泵体,叶轮分水器,为不锈钢材质。
2·Once the water distributor on the bottom of UASB is often blocked, when operating in practice, the uniformity of water distribution is destroyed.
厌氧反应器uasb在实际运行中,其底部的布水器经常出现堵塞,从而造成了配水的不均匀。
3·A lot of branch pipes mounted on the water distributor and each pipe has a spout at its outer end, which can refract water towards around thus to form a ball body.
是在一个球形配水体上辐射安装着许多支管,每根支管的外端装有向周围折射的喷嘴,从而组成一个球体。
4·In order to improve the efficiency of water treatment, the lack of this construction is put forward in the paper in the light of the characters of the water distributor in engineering.
为了提高处理效果,针对工程中布水器的结构特点,本文指出了尺寸结构上存在的不足。
5·There are inlets and outlets on all the major reservoirs, distributor canals, a series of very sophisticated water control devices.
所有主要水库,分流河道和一系列非常精细的控水装置上都有进水口和出水口。
6·Water cooling and sealing technique is used for the gear-box of distributor.
布料器采用水冷水封式传动箱和多环布料溜槽。
7·These structural parameters produce to the different impact of the oil-water separation, the relatively large effect is the diameter of liquid distributor and the hole shape in the all parameters.
经过分析可知,这些结构参数不同程度的影响了油水分离效果,其中对油水分离效果影响比较明显的是配液管的管径和对配液孔形状的选取。