1·Install drain hose to vent tube at bottom of pump.
在水泵底部安装排放管到排水管。
2·One Quart drip proof cup - clamp type - with a extra vent tube.
一夸脱滴证明杯-钳型-一个额外的排气管。
3·A cathode ray tube, CRT, you either remove the plastic housing around the tube, this is easy enough, or you work through the vent panels in the top of the housing.
CRT显示屏的阴极射线管，要么把包着管子的塑料外壳扒掉，其实挺简单的，要么直接从显示器外壳上的通风孔盖板走。
4·Connect the vent hose to the axle shaft tube.
向主动轴管上连接通风管。
5·Disconnect the vent hose from the axle shaft tube.
从主动轴管上断开通风管。
6·The port side is the vent valve and tubing, and the starboard side is the blow tube.
港口方面是发泄阀和油管，和右舷侧是打击管。
7·Range hypothesis vent plug and tube joint is not correct, then in the transformer oil injection will constitute a bubble chamber.
假设放气塞和管接头的方位不正确，那么在变压器注油以后会构成气泡腔。
8·It is equipped with asphalt return tube, anti-puffing pressure vent valve, anti-aging overhead nitrogen valve, thermometer, volumeter and output asphalt rapid discharge valve and coupling.
配备沥青溢流管、防冒液呼吸阀、防老化顶置充氮阀、温度计、容量计和输出沥青的快速卸料阀及接耦。