1·Push valve handle onto extension assembly.
将阀门手柄压到加长组件上。
2·You need to design a plant to show that you can handle an inadvertent opening of the pressurised relief valve.
你们需要设计出一个电站来展示出,你们能够掌握好增压减压阀门的,疏忽打开。
3·The installation of a Watts air gap with the drain line terminating above a floor drain will handle any normal discharge or nuisance spitting through the relief valve.
连接通向地漏的排泄管的美国瓦茨气隙的安装将有助于处理通过安全阀排出的任何正常排放或有害的泄漏。
4·Imported from Italian COSTER valve with big cover, flabelliform fog-spray, good handle with no jam, nozzle P, D, R is commutative, meeting with the different testing requirements.
引进原装意大利COSTER大盖嘴阀门，雾状呈扇形、不堵、手感好，P、D、R喷嘴可互换，以达到不同检测喷雾要求。
5·Tack out the dowel in lower part of handle of the valve, and undraw the agraffe gently. Rotate handle of the valve clockwise to open valve to begin discharging.
卸下排液阀手柄下侧的塑料销子，并轻轻拉开锁扣， 将阀门手柄朝顺时针方向扳动以开始排料；
6·It snaps onto the stem and locks into the slot for turning-stops of a ball valve of any material, in place of its standard handle.
它夹在阀杆上，并且锁在槽内，用于任何材料球阀的旋转止动，代替其标准手柄。
7·The regulating handle consists of manoeuvring valve pos. no. 01 and handle mechanism.
调节手柄由操纵阀01和手柄机构组成。
8·Round Safety handle -design prevents accidental operation of low-torque ball valve by snagging the lever handle with personal clothing or equipment.
圆形安全手柄—这种结构用于防止由于人员服装或设备绊住水平手柄导致的低扭矩阀门的操作故障。
9·Corrosion resistant ss fluid passages, air Control Valve in Ergonomic handle, with new MAXIMUM DELIVERY air nozzles.
耐腐蚀不锈钢流体通道，空气控制阀在人体工程学手柄，最大的传送与新空气喷嘴在行业后面。
10·Soft handle, all of the imported stainless steel bottom plate, consummate design, convenient repair, check valve steam flow regulation, steam pipe sheath, long life steam valve.
柔软手柄，全部进口部锈钢底板，精良设计，维修方便，回气阀蒸汽流量调节，蒸汽管外套，长寿命气阀。