1·Fit universal joint on the steering gear.
安装转向机上的万向节。
2·Undo hexagon-head bolt on universal joint.
旋开万向节上的六角头螺栓。
3·Remove universal joint from steering gear.
从转向机上拆下万向节。
4·Remove universal joint at the steering spindle.
拆下转向轴处的万向节。
5·The transmission component is a universal joint.
所述传动部件为万向节。
6·Remove the universal joint strap bolts at the pinion shaft yoke.
在小齿轮轴轴轭处拆卸万向节扣夹螺栓。
7·This universal joint mounts to the bell crank and OSS Mount collet.
万向节安装到这个钟曲柄和OSS芒筒夹的应用。
8·The bell crank connects to a Tiller handle using a universal joint.
钟曲柄连接到一个使用通用蘖处理联合。
9·These flexible universal joint prevent the drive shaft from breaking.
万向节防止驱动轴断裂。
10·This universal joint must be modified to reduce the amount of torsional play.
这种普遍的联合必须进行修改，以减少播放量扭转。
1·Remove universal joint at the steering spindle.
拆下转向轴处的万向节。
2·The bell crank is attached to the universal joint, left and right tie rods, and to the trike frame. The bell crank assembly is shown below.
贝尔曲柄相连的万向节，左，右拉杆，并能三轮车框架。钟曲轴装配如下。
3·The general motion equation of rigid body in gyroscopic theory is used to analyze the motion of double universal joint in the transmission system of engineering mechanism vibration grinder.
用陀螺理论中刚体一般运动的方程对汽车、工程机械、振动磨机等系统中传动系的双万向节进行了运动分析。
4·BMW Corporation of West Germany has developed a torsion rig for universal joint propeller shaft and axle shaft for the use of testing four-wheel-drive cars.
联邦德国的BMW公司开发了一种万向节传动轴与半轴的扭转试验台，专供四轮驱动型桥车试验用。
5·Remove the universal joint strap bolts at the pinion shaft yoke.
在小齿轮轴轴轭处拆卸万向节扣夹螺栓。