1·Uniformly distributed load along a line of infinite length;
均布荷载作用在一无限长的直线上；
2·Uniformly distributed load on an infinitely long strip-area;
均布荷载作用在无限长的条形面积上；
3·A model for analyzing the large deflection of an elastic cantilever beam with constraint under uniformly distributed load was established.
建立了分析均布载荷作用下受约束悬臂梁的弹性大变形三阶段模型。
4·In this paper the behavior, failure models and ultimate bearing capacity of the two-span continuous wall-beams under the uniformly distributed load is presented.
本文论述了两跨连续墙梁在均布竖向荷载作用下的受力特性、破坏特征和承载能力。
5·The analytic expressions of deflection and displacement of the beams for various boundary conditions were obtained under combined electric field and uniformly distributed load.
并求得在电场和均布力联合作用下各种边界条件梁的挠度和位移解析表达式。
6·The present article researches the problems of the lateral instability of cantilever rectangular plates under a concentrated force or a uniformly distributed load respectively.
本文研究了悬臂矩形板受均布载荷或集中载荷作用时的侧屈问题。
7·Stress distribution at cross section of transverse uniformly distributed load and non-uniformly distributed load applied to concrete cylinder by finite element method is analyzed.
采用有限元的方法计算分析了混凝土圆柱体在受横向均匀线荷载和非均匀线荷载时其横截面上的应力状况。
8·Under action of uniformly distributed load or uniformly distributed moment along edge, results are compared with that obtained by perturbation method, and it shows that the method used in…
均布荷载或均布边缘力矩作用下的计算结果同摄动法的计算结果作了比较，结果表明本文的方法具有大得多的收敛范围。
9·The circular elastic slice of degassing valve was simplified as ring mechanics and the mechanic model of the slice under uniformly distributed load was established to investigate its deformation.
将透气阀圆形弹性阀片的应用结构简化为了环形结构，建立了阀片受均布载荷时的力学模型，并研究了阀片的弯曲变形。
10·The plate is subjected to a uniformly distributed rectangular load pulse and Simply-supported along its edge.
圆板受均匀分布的矩形脉冲载荷作用。