1·Torsional strength and stiffness were measured.
测定各组的抗扭强度和抗扭刚度。
2·The torsional strength of the notch of spheroidal graphite (SG) cast iron by continuous casting was tested.
研究了一种用水平连铸技术生产的球墨铸铁型材的扭转强度和缺口扭转强度。
3·The torsional strength of the drilling tools can be greatly increased by using the double shoulder tool joint.
双台肩钻具接头可大幅度提高钻具的抗扭强度。
4·Moreover, the paper presents a relatively simple and comprehensive theoretical method for torsional strength calculation.
同时，提出了这类双壳大舱口船舶扭转强度的理论计算方法。
5·By means of calculating the shafting torsional strength, a decision of replacing the main shaft by new one, whose bearing diameter is increased, was made reasonably and duly.
通过对轮系扭振强度计算，科学及时地作出了更换主轴的决定，并适当加大了新主轴轴颈直径。
6·The ring network switch device increases the electric clearance, effectively prevents the occurrence of the creepage phenomenon and enhances the torsional strength of the switch principal axis.
采用本发明增加了电气间隙，有效的防止了爬电现象的产生，加强了开关主轴的抗扭强度。
7·The 3 hollow double heads compression screw appear to offer distinct advantage over the 3 solid screw, trifin in the against pressure, against bending force, torsional strength and torsional rigidity.
三枚中空双头螺纹加压钉比三枚实心螺纹钉、三翼钉在抗压、抗弯、抗扭强度和刚度上占有一定的优势。
8·Before cycle 24 commenced, the position and strength of the torsional oscillation correctly predicted the late arrival of this cycle's sunspot activity.
在第24个周期开始前，人们通过太阳的扭转振动的位置和强度准确的预知了第24周期内太阳黑子活动的推迟。
9·The strength, rigidity, stability and torsional rigidity of the bodywork structure were calculated by using finite element analysis. Thus the optimum fillet of the bodywork structure can be specified.
采用有限单元法对车体结构的强度、刚度、稳定性、挠跨比、扭转刚度进行计算，为车体设计提供了参考依据。
10·Under various adherent condition and solidify condition, the Torsional shear strength of the copper phosphate inorganic adhesive were tested. The results which are useful to application were obtained.
对磷酸氧化铜无机胶套接扭剪试件在不同粘接表面状态，不同固化条件下的扭剪强度进行了系统测试，得出了对实际应用有价值的结论。