torsional stiffness

扭转刚度:物体在受到扭转作用时抵抗变形的能力。
常用释义
扭转刚度:物体在受到扭转作用时抵抗变形的能力。

例句

1·The base unit scores with an excellent torsional stiffness.

一个出色的扭转刚度的基础单元分数与。

2·Section Properties: Bending, Shear, and Torsional Stiffness;

挠度,剪切和刚度;

3·Each specimen underwent axial and torsional stiffness testing along with cyclic axial loading to failure.

每个样本均采用循环轴向荷载以至固定失效来测定其轴向刚度和抗扭刚度。

4·Torsional stiffness of tower crane mast is closely related with the arrangement of Web members of the mast.

塔式起重机塔身的抗扭刚度与塔身腹杆布置密切相关。

5·The influence to stress of skew arch bridge was studied by changing the abutment torsional stiffness and width-span ratio.

通过改变桥台抗扭刚度和宽跨比,研究对斜交拱桥受力的影响。

6·Diaphragm couplings commonly used in the servo system, the membrane has good torsional stiffness, but less in the bellows coupling.

膜片联轴器常用于伺服系统中,膜片具有很好的扭矩刚性,但稍逊于波纹管联轴器。

7·The effective methods for controlling the torsional response are put forward by adjusting the torsional stiffness and damping of flexible jointer.

提出了通过调节柔性联接器的扭转刚度和阻尼对旋转系统周期冲击响应进行有效控制的方法。

8·The elastic characteristic and torsional stiffness of four kinds of typical dual mass flywheel type torsional vibration damper is analyzed in detail.

对汽车动力传动系双质量飞轮式扭振减振器的选型和设计具有一定的参考价值。

9·The torsional stiffness of a large turbogenerator rotor body and the factors influencing the stiffness are studied systematically in by using the finite element method.

本文利用有限元数值计算方法,系统研究了发电机转子本体部分的扭转刚度及其主要的影响因素。

10·Secondly, the relationship between rotary inertia coefficient, torsional stiffness, transmission gearbox and torsional vibration frequency is analyzed on the basis of the design model.

其次,在双质量飞轮设计模型的基础上,分析了双质量飞轮转动惯量系数、扭转刚度、变速器与系统扭振频率的关系。

同义词

[力]扭转刚度;抗扭劲度