1·Extends tool life, reducing tool sharpening and downtime.
延长刀具寿命,减少停机时间和锐化工具。
2·It provides longer tool life and extremely good surface finish.
它提供了工具寿命和极为良好的表面光洁度。
3·Effectively prolong tool life and provide excellent surface finishing.
有效地保护及提供极佳的工件光洁度。
4·Under dry cutting state, tool life is affected mostly by cutting depth.
在干切状态下,切削深度对刀具寿命影响最大。
5·The coating is now recognized as one of the key technologies to lengthen tool life.
目前涂层被认为是延长刀具寿命最重要的工艺方法之一。
6·We can monitor tool life, control the processes and reduce the tool cost per piece.
我们跟踪刀具寿命、控制并降低单件加工成本。
7·When cooling by emulsion, tool life is greatly improved, about 3 times of dry cutting.
乳化液冷却下,刀具寿命有很大提高,约为干切条件下的3倍。
8·However, in case of ductile materials they cause poor surface finish and low tool life.
可是在塑性材料加工时,造成表面光洁度和刀具寿命低。
9·To improve a tool life in this case, therefore, the flank notch wear must be depressed to generate.
为了提高刀具耐用度,就必须减小后刀面边界磨损。
10·The RCI of tool life is obtained by the power signal, the Taylor formula, the database of cutting parameters and cutting time.
刀具寿命相对消耗量是利用功率信号、泰勒公式、切削工艺参数库以及在线获取的实际切削时间来获取的。