1·There's a 15-amp thermal circuit breaker for manual resetting.
有一个15安培的热断路器手动复位。
2·Based on this, the thermal circuit model with distribution parameters is built up.
在此基础上，热分布参数电路模型被建立起来。
3·On the basis of analyzing the thermal circuit model of motor, an available method for building thermal model of motor is presented in this thesis.
本文在认真分析了电动机热路模型的基础上，提出了一种建立不同电动机热模型的有效方法。
4·The Dynamic Thermal Circuit Rating (DTCR) of the transmission lines can be considered as the calculation basis for the increase of the transmission line capacity.
输电线动态热容等级DTCR可用作提高输电线路的传输容量的核算依据。
5·Low secondary thermal shrinking rate, good flatness; Used for Flexible Printed Circuit (FPCB).
二次热收缩率小，平整度好；用于柔性印刷线路板等行业。
6·Internal circuit protection includes: thermal shutdown with hysteresis, UVLO, and crossover-current protection.
内部电路保护包括：热关机滞后，UVLO，及交叉电流保护。
7·A modulated high-frequency signal is distorted by the thermal behaviour through complex intermodulation phenomena, although the temperature response of the circuit is slow.
虽然电路对温度响应性很低，调制的高频率信号也会由于热行为产生的复杂的互相调制现象而发生失真。
8·The?circuit elements were arranged in a 'ladder circuit' comprising repeating units of thermal resistors and thermal capacitors.
电路元器件包括热电阻和热电容组成的重复单元被安置成为一个梯形电路。
9·The heat sink is in thermal contact with the integrated circuit package to extract heat during operation.
散热片与集成电路封装热接触用于在工作过程中提取热量。
10·The researchers modelled the thermal effects of a heterojunction bipolar transistor in an integrated circuit using thermal resistors and thermal capacitors.
研究人员通过使用热电阻和热电容对集成电路中异质连接双极型晶体管的热效应进行建模分析。