tension bar

张力杆:一种用于支撑和加固建筑结构的金属杆
常用释义
张力杆:一种用于支撑和加固建筑结构的金属杆,通过承受拉力来保持结构的稳定性。

例句

1·The rotor structure of claim 1, wherein said tension bar means are made of a composite fiber material.

转子结构索赔1,其中表示,拉杆手段制成的复合纤维材料。

2·Presents the strength reduction calculating method of the tension bar when the minimum span length is not sufficed.

同时给出了当构件跨度不满足最小跨度要求时受拉钢筋强度折减的计算方法。

3·But in this project, steel tube tower which use a lot of flexible tension bar and is high, so nonlinear analysis is needed.

可是,在本工程中,由于采用柔性拉杆钢管塔使用了大量的柔性拉杆,并且结构高度高具有高柔的特点,就必须采用非线性分析。

4·Sidewaist the tension bar, coupled with the modest size of legs planes, to provide the best maternal focus, making production more smoothly and less painful.

腰侧的拉杆,配上大小适中的腿架,提供产妇最佳的着力点,从而使生产更顺利,更少痛苦。

5·To enhance product quality, measures of changing selvage stitch, adjusting shed closing time and tension bar were done, and the first grade rate in storage can reach to 98.8%.

为了提高产品质量,通过改变边组织、调整梭口闭合时间、调节张力片张力等措施,使入库一等品率达98.8%。

6·The design scheme of installing pre-stressed anchorage rod in the channels of A and B tension bar in the top pintle of miter gate has been adopted, which is the first one at home.

工程采用的在人字门顶枢A、B拉架预留槽内预埋预应力锚杆的设计方案,在国内尚属首例。

7·The torsion resistance of the tension bar and the calculatiolls of bending shear stress, free torsional shearstress and bending torsional shear stress on the section are also discussed.

性质:用圆柱形材料试件作抗扭实验可求得扭矩和扭角的关系,相应最大扭矩的最大剪断应力叫抗扭强度。

8·Hydraulic and electrical control is applied to the machine , with free adjustment of stroke for the gliding block, as well as stable and reliable mechanical stopper and synchronized tension bar.

机器采用液压电气控制,滑块行程可任意调节,机械挡块,扭轴同步、平稳可靠;

9·The main parameters considered are height of the cable truss, area of cross section of tensile bar, pre-tension of tensile bar and thickness of glass panel.

通过有限元程序对点支式玻璃幕墙索桁架支承体系中索桁架结构高度、拉杆截面积、拉杆预拉力和玻璃面板厚度对其受力性能的影响进行了研究。

10·The basic principle of micro tension controlling in rolling process of bar and the realization means of micro tension controlling in PLC program were analyzed.

分析了棒材轧制过程中微张力控制的基本原理,以及微张力控制在PLC程序中的实现方式。

同义词

[机]拉杆;张力杆