1·And the breaking point is given there in the third column, and we call that the ultimate tensile strength.
断点在第三列,有举出,我们称之为,极限抗拉强度。
2·To measure tensile strength and breaking elongation of single yard.
测定单根纱线的抗拉断裂强力和断裂伸长。
3·Increase in the amount of MTES increases the tensile strength and decreases the ratio of elongation for breaking of the materials.
并且随着MTES量的增加,材料的拉伸强度增强而断裂伸长率逐渐降低。
4·In this paper, the problem of consistency is investigated for the specific breaking strength of cotton measured on different tensile testers.
本文就各种强力仪测定棉纤维断裂比强度指标具有一致性的问题进行研究。
5·Hardness, tensile strength, breaking elongation ratio and aging property of samples were tested and surface of sample after aging was represented by SEM.
对试样进行了硬度、拉伸强度、断裂伸长率、热老化等性能试验;对老化后的试样表面进行了SEM表征。
6·In this paper, the relation of tensile strength, tensile modulus and breaking elongation of unsaturated polyester casting matrix cured at room temperature to curing degree was discussed.
本文讨论了常温固化不饱和聚酯树脂浇涛体的拉伸强度、拉伸模量、断裂延伸率与固化度之间的关系。
7·The results showed that tensile strength, tensile yield stress and tensile breaking stress were increased with the increase of bore distance;
结果表明,随筛板孔距的增加,其拉伸强度、拉伸屈服应力及拉伸断裂应力均提高;
8·Used for measure tensile strength and breaking elongation of single yarn and print statistic results.
用于全自动测定单根纱线的断裂强力和断裂伸长,打印测试数据和统计结果。
9·The tensile strength and initial modulus were remarkably decreased and the breaking elongation and flexibility of grafted fiber were increased.
接枝后纤维强度和初始模量下降,断裂伸长和柔顺性提高;耐酸、耐碱能力随接枝率的增加而提高,热稳定性提高,回潮率下降。
10·The results show that the tensile strength, breaking elongation, impact strength and MFR of nylon 6 increase simultaneously after some PAMAM were added. The optimum increment is 1.0%.
结果发现,在尼龙6中添加pamam后,尼龙6的拉伸强度、断裂伸长率、缺口冲击强度及熔体流动速率均有所提高,PAMAM添加量为1.0%时效果最佳。