1·The outer casing superior surface, forms the configuration of the suction inlet, are inclined to the downwards.
形成吸入口外形的外壳上表面为朝前向下倾斜的状态，上表面有反射部分。
2·The sucking room is provided on the bellmouthing end of the reducing pipe, another end of the sucking room is a suction inlet.
吸入室安装在异径 管的喇叭口端，吸入室的另一端为吸入口。
3·The suction inlet of vacuum dust-collector can avoid the sucked hair or wire flowing to the belt to avoid the damage of suction inlet.
本发明真空吸尘器的吸入口，可以防止吸入到吸入口内部的头发丝或线头等异物流入皮带处，防止吸入口受损。
4·New forming process on the suction inlet of large-size electric motors as well as its raw materials dimension and mold construction is introduced.
介绍了大型电机吸风嘴成型工艺、坯料尺寸确定及模具结构。
5·The disadvantages of a compressor muffler are analyzed, and a new scheme is proposed based on the measured noise spectrum at the suction inlet of the compressor.
分析某型号压缩机吸气消声器存在的不足，在测试压缩机吸气通道噪声源频谱的基础上提出消声器改进方案。
6·The vaporized refrigerant vapor from the low temperature and low pressure, suction inlet of the compressor to be compressed, compressed and then discharged into the next cycle.
蒸发后的低温低压冷媒蒸气，从压缩机的吸气口流回，被压缩压缩后排出进入下一循环。
7·Inadequate submergence can result in pre-rotation of the water in the wet-well, resulting in the formation of strong free-surface air core vortices and the entrance of air into the pump suction inlet.
潜水不恰当可能导致湿井内的水预旋转，导致形成强烈的自由表面空气中心漩涡，并使得空气进入泵的吸入进口管道。
8·Gas-separation equipment is also used in downhole applications, such as the protection of pumping equipment against gas lock by separating and redirecting free gas at the pump suction or inlet.
气体分离设备也在井下使用，如保护抽油设备使得不会在泵的吸入处或入口处由于游离气的分离和改变方向而发生气锁。
9·To reduce resistance from the suction section of pump, the water pump must be installed at the condenser inlet of air conditioner.
为减小泵的吸入段阻力，水泵必须装在空调机冷凝器进口。
10·These vacuum pumps come standard with many important features that others offer as options - quality inlet filter, premium exhaust silencers, suction hose and industrial strength channel iron frame.
当其他公司只提供作为另加选择时，美国旋风的真空泵的标准规格已包括有下列的重要配件- 高品质入口过滤芯，高级的排气消音装置，抽吸软管和工业级槽钢底架。