1·Remove the steering knuckle from the strut.
自支柱拆除转向关节。
2·Remove the steering knuckle from the strut.
拆去连接支撑架到球销的固定夹。
3·Steering axis inclination is the inward tilt of the steering knuckle at the top.
督导轴倾角是外来倾斜的转向节在最上方。
4·It was presented that a new precision forming technology of car steering knuckle in this paper.
文章提出了轿车转向节精密成形新工艺。
5·Situate the steering knuckle assembly so that it fits on to the cross member knuckle back plate.
位于该转向节大会，以便它适合于板的横梁关节回来。
6·Thus, the steering knuckle, spindle, wheels, and tires turn to one side, causing the car to turn.
这样，转向节、转向节轴端、车轮和轮胎都会向一侧旋转，汽车实现转向。
7·The results show that the thermomechanical treatment can improve the quality of the automobile steering knuckle.
结果表明，锻造余热淬火工艺对汽车转向节质量有明显改善。
8·These include the fabrication of the Derailleur Cable Stop, and drilling the holes for both steering knuckle levels.
这些措施包括停止生产的变速器电缆，钻两个孔，关节指导的水平。
9·The last modification required to the brake faceplate, is making the plate flush with the steering knuckle faceplate.
最后修改面板所需的制动，转向是使板与关节冲洗面板中删除。
10·A steering knuckle is the key component in cars, which needs high requirements in dimensional accuracy and product quality.
轿车转向节是轿车上的关键零件，对尺寸精度和产品质量要求很高。