1·Six combination screw mould, stainless steel mould and rivet mould are products with more stable quality.
六片组合模、不锈钢模具、铆钉模具更是精诚质量优为稳定的产品；
2·Disign principle, structure and size of steel mould bamboo plywood form and bamboo plywood form are presented summarily.
本文综述了钢竹模板和竹胶板模板的设计原则、模板结构、模板规格及计算方法。
3·The technics of chemical etching, chemical polishing and chromium electroplating for stainless steel mould were studied.
研究了不锈钢模具板的化学蚀刻、化学抛光和电镀铬工艺。
4·The technics of chemical etching, chemical polishing and chromium electroplating for stainless steel mould were studied.
采用化学蚀刻法测定了氚在不锈钢材料中的纵向分布。
5·The article introduces specifically the gravity darn adopts the construction technology of large scale steel mould and the operational main points.
具体介绍重力坝混凝土采用大型钢模板施工工艺及操作要点。
6·On the other hand, simulate the interference fitting process to get the deformation distribution of the mould cavity by steel mould correlation method.
另一是用钢模比拟法对扁挤压筒预紧装配过程进行模拟，获得了挤压筒内孔型腔变形规律。
7·About half of all aluminium castings are made using high-pressure die-casting (HPDC), in which a molten aluminium alloy is injected under pressure into a steel mould, or die.
大约有一半的铸铝工艺是高压模铸(HPDC)，在这种工艺中，通过压力将液态铝合金注入钢模，或模具。
8·My company mainly produces various specifications grilled bending, hydraulic and crafts stainless steel mould, lamp cover mould, washbasin mould and glass furniture mould.
我厂主要生产各种规格烤弯、油压和手工艺不锈钢模具、洗手盆模具、灯饰热弯模具、家私玻璃模具。
9·Problems: the primary stress to which the surface of the mould is exposed are thermal shock, abrasion and chemical reactions between the liquid alloy and the iron in the steel mould.
问题：压铸模具表面主要面临的问题有热冲击、磨损、液态合金与模具钢的化学反应等。
10·Based on the three dimensional Finite Element Method (FEM), the temperature and microstructure variations of large scale P20 steel mould during quenching in 3 different processes were studied.
通过建立合适的三维有限元模型，研究了P 20钢大型模具按3种工艺进行淬火时的温度组织变化。