1·A steel disc had been welded on to the mechanism.
一个钢制圆片已经焊到了这个机械装置上。
2·Selection typical low-steel disc pad formulation.
选择具有代表性低金属盘式片配方。
3·The tribological properties of vanadium compacted graphite cast iron coupled with steel disc have been investigated.
本文对含微量硼铜的蠕墨铸铁性能进行试验研究,并与合金铸铁性能对比分析。
4·The invention aims at adding a steel disc into the tyre, thus the automobile tyre can not be stabbed by the sharp object any more.
本发明的目的是在轮胎里加入钢片,这样汽车轮胎就不能被尖利物刺穿了。
5·It normally used vernier caliper, fitter disc, steel ruler, and other frequently used tools.
划线时,通常使用游标卡尺、钳工划线盘、钢直尺等常用工具。
6·By observation and analysis of the test data, changing the plate steel endshield of motor into the disc iron one can improve the rigidness of endshield, and reduce the axial vibration of motor.
通过观察和检测数据分析,电动机的平板式钢板端盖改为盘式铸铁端盖,可提高端盖刚度,降低电机轴向振动。
7·At present, the serial disc chippers adopt wear-resisting backing board plate coated with chromium. The flying knife, bottom knife and flying knife bolt adopt the special steel and are made specially.
目前我公司系列盘式削片机刀盘采用耐磨垫板镀铬,飞刀、底刀、飞刀螺栓采用特种钢材特殊制作而成。
8·Main equipment design of strip slitting unit applied for big steel coil, heavy thickness and high strength, such as uncoiling machine, disc shear and recoiler were researched.
对大卷、厚壁、高强度钢带纵剪机组的主要设备如开卷机、圆盘剪、卷取机的设计进行了探讨。
9·The new disc consists of two stainless steel pieces that articulate against each another with a ball and trough design.
这种新椎间盘由两块不锈钢组成,相互之间有关节通过一种球体和槽体的设计对抗。
10·The sliding wear tests were conducted on the "cylinder-on-disc" machine with the stationary cylinder of steel 52100 sliding against the rotating disc specimens.
滑动磨损试验是在“柱-盘”试验机上进行的,其固定的圆柱为52100钢,在旋转的圆盘试样上滑动。