1·The first period of production shows that the result of steam injection is good.
从第一周期开采过程看，注汽效果较好。
2·Under the production condition of steam injection, the energy ratio can reach 7.0.
在注入蒸汽开采初始条件下，能量效率可以达到7.0。
3·This article reviews the chief techniques of EOR by steam injection with ancillary additives.
本文综述了国外添加化学剂注蒸汽采油的主要技术。
4·Heat efficiency of steam injection and hot water injection was 0.349 and 0.465 under the given condition.
在给定的条件下，注入蒸气和热水开采过程的热量的有效利用率分别为0.349和0.465。
5·The successful development of the additive provides a technical support for heavy oil steam injection recovery.
该助排剂的研制成功为稠油注汽开采提供了技术支持。
6·The automatic distribution system has been developed according to the characteristics of steam injection boiler.
根据注汽锅炉系统的特点，研制了自动配风调节系统。
7·Method Steam injection development and well pattern of horizontal Wells were studied by using numerical simulation.
方法利用数值模拟方法，对水平井注蒸汽的开发、布井方式等进行研究。
8·The temperature behavior within the Poplar flake-board mat during steam injection vacuum pressing (SIVP) was studied.
研究了喷蒸真空热压杨木大片刨花板坯内部的温度分布特征。
9·Therefore, steam injection parameters for Nine-7 Block were analyzed and optimized using orthogonal experiment design.
为此，利用正交试验设计方法对九7区注汽工艺参数进行了敏感性分析和优化。
10·Purpose To determine oil recovery factor and recoverable reserves of heavy oil reservoir developed by steam injection.
目的确定稠油油藏注蒸汽开发的原油采收率和可采储量。