1·In this paper, the measurements adopted for increasing Xianmeng sinter machine productivity were presented, and the theoretical analysis was conducted.
介绍了湘锰烧结厂提高烧结机利用系数的具体作法,并从理论上进行了分析。
2·The shorter service life of single roller crushers installed on the end of sinter machine is a difficult technology problem to the steel-iron industry.
烧结机尾部的单辊热破碎机齿冠使用寿命过短,是钢铁行业的一大技术难题。
3·As the implementation of these technical measurements, the productivity of sinter machine was increased, and was helpful for increasing BF output and energy saving.
通过一系列技术措施的实施,烧结机利用系数得以提高,为高炉增铁节焦创造了条件。
4·In order to reduce sinter machine the nose airplane tail air leak rate, designed the software seal, in agglutinated in the cup carries on the experiment, the effect was remarkable.
为了降低烧结机机头机尾的漏风率,设计了软体密封,在烧结杯中进行试验,效果显著。
5·Feeding device of sintering machine is the key equipment in sintering process, Its distribution result has great effect on the output and quality of sinter ore.
烧结机头端布料器是烧结生产中的关键设备,其布料效果的好坏将直接影响烧结矿的产量和质量。
6·The waste heat boiler of sinter ring cold machine was developed to recover sensible heat of sintering mine.
为回收烧结矿显热,研制出烧结环冷机余热锅炉。
7·The analysis and study was aiming at the cylinder mix machine in No. 3 shop of Wuhan Steel and Iron Corporation Sinter Factory.
本文就是针对武钢公司烧结厂第三烧结车间的烧结混料机来展开分析和研究的。
8·The research was focus on the following aspects: the study of mineral composition and microstructure of sinter by OM, SEM, mercury intrusion machine etc;
研究内容主要包括:借助矿相显微镜、扫描电子显微镜、压汞仪等工具对烧结矿的矿物组成及显微结构进行研究;