1·After combing, the short fiber content of the grafted fibers reached 71%.
梳理后，阻燃纤维的短纤维含量达到71%。
2·The results showed that waste nylon short fiber was finely dispersed in ACM;
结果表明，废尼龙短纤维能较好地分散在丙烯酸酯橡胶中；
3·In addition, it proceeds careful investigation about the blend craft about flax short fiber.
此外，对亚麻短纤维的混纺工艺进行了一定考察。
4·The impact of cylindrical refiner and disc refiner on long fiber and short fiber properties were compared.
比较了圆柱磨与盘磨对长纤维和短纤维打浆性能的影响。
5·Before singeing, the cloth is thoroughly dried and brushed so the short fiber ends will be brought to the surface.
在烧毛之前，织物要完全烘干并通过刷毛使短纤维浮现在织物表面。
6·The higher the volume fraction of short fiber, the more serious shear stress concentration in the end of short fiber;
纤维体积分数越大，纤维末端剪切应力集中越严重；
7·Al2O3 short fiber reinforced aluminum matrix composites for high performance piston was prepared by squeezing casting.
用挤压铸造法制备了氧化铝短纤维增强铝合金内燃机活塞。
8·Presently, only measuring instrument using vibration method can be adopted to measure the fineness of a thread of short fiber.
目前，要测定一根短纤维的细度，只有采用振动法的测定仪器。
9·The traditional shear lag theory of stress transfer in short fiber reinforced metal matrix composites was modified and improved.
对短纤维增强金属基复合材料应力传递的传统剪滞理论进行了修正和改进。
10·The results showed that the filling of short fiber evidently improved tear strength, modulus at 10%and Shore A hardness of SFRC.
结果表明，短纤维的加入显著提高了SFRC的撕裂强度、10%定伸应力及邵尔A型硬度；