shaft block

轴承座:一种用于固定轴承的机械零件
常用释义
轴承座:一种用于固定轴承的机械零件,通常用于支撑旋转轴并减小摩擦。

例句

1·Sparated Bearing block for main transmission shaft Easy for maintenance and fix.

主传动轴承座可分拆结构,方便安装及维护。

2·It includes driving shaft, helical spring, key way on the driving shaft, block, front stop unit, back stop unit, etc.

传动 轴、螺旋弹簧、传动轴上的键槽、滑块、前限位和后限位等部分。

3·The spokes are inserted through the center of a sliding block and the sliding block slides along the spokes radially. The secondary shaft and the sliding block are connected by a chain bar.

滑块由轮辐从中间穿入并沿轮辐径向滑动,副轴和滑块之间用链杆连接。

4·The rocker arm is connected with the balance weight block through a rotary shaft, a cam, a pulley, a steel cable and a lifting rod, and an initial position can be selected through a barrier shaft.

摇臂通过转轴、凸轮、滑轮、钢丝绳、提升杆与配重块相连,初始位置可由挡轴选定;

5·Block in the mud with four skeleton oil seal and sleeve to prevent shaft wear and prolong the service life of shaft.

泥浆泵座中装有四只骨架油封和轴套,防备轴磨损,延伸轴的应用寿命。

6·Twin pillow blocks have the same dynamic load rating as the doubles and are a good choice when using only one pillow block per shaft or in applications used to cantilever load or moment.

双人枕头块具有相同的动态负载率为双打是一个很好的选择时,只用一个枕头每块轴或申请使用悬臂式负荷或时刻。

7·When the positioning bearing block is in spin welding along with the cylinder body, a cantilever screw rod shaft is in a relatively stable state to satisfy automatic welding.

定位轴承座随筒体旋转焊接时,悬臂螺杆轴处于相对稳定,满足于自动焊接。

8·Usage: suitable for precise lathing of rotor outer circle and commutator that with big shaft diameter and V block can not be used.

用途:适用于V型块无法使用的较大轴径的转子外圆或换向器的精车。

9·Sparated Bearing block for main transmission shaft Easy for maintenance and fix.

半精加工的主轴承安装后需要修整和调配,这样曲轴就必须拆下。

10·Connected with service shaft by cross sliding block coupling.

需采用十字滑快式联轴器与用户轴连接。

同义词