1·Several factors affecting the properties of the polyurethane rigid foam are discussed.
对影响硬泡性能的一些因素进行了讨论。
2·Products can be used in intumescent coating, PU rigid foam, thermoplastics and UP (unsaturated) resin etc.
所生产的阻燃剂可用于涂料、塑料、热固型树脂、纺织涂层等。
3·Experiments show that properties of the rigid foam are good, because decrease in the quantity of foam stabilizer, the cost is low.
实验证明,泡沫性能良好,泡沫稳定剂使用量减少,泡沫成本大幅度下降。
4·The method has been used on the PUR rigid foam as an example and the result is satisfied comparing with the data of the experiment.
以PUR 发泡硬泡沫塑料为例,将此方法的计算结果与试验数据进行了比较。
5·The effects of poly ether, F_(11), water, catalyst and surfactant on the mobility of polyurethane rigid foam were studied quantitatively.
定量研究了聚醚、F_(11)用量、水分、催化剂、匀泡剂对泡沫流动性的影响。
6·A open cell polyurethane rigid foam for vacuum panel core material was prepared. The open cell percent of the core material is about 95%.
制备了用于聚氨酯真空隔热板的开孔硬泡芯材,该泡沫芯材的开孔率达95%。
7·The walls, roof and floor are fabricated from rigid foam insulation sandwiched between two sheets of steel known as Structural Insulated Panel (SIP).
墙壁、屋顶和地板是由刚性泡沫保温材料制成,夹在两片钢片之间,称为隔热板结构。
8·Basic composition and preparation technology of PU rigid foam are described and various factors that exert effects in the course of preparation are discussed.
介绍了该PU硬泡的基本组成和制备工艺,讨论了制备过程中的各种影响因素。
9·The relationships between specific heat of PU rigid foam at low. temperature and such parameters as those of temperature, density and ageing time, etc., have been discussed.
讨论了聚氨酯硬泡沫塑料低温比热与密度、温度以及空气中存放时间等参数的关系。
10·It is used to produce the model airplane without causing the tail to bend upwards. The difficulty for the stereotype of the rigid foam plastic wing with dome upper surface is solved.
它的目的用它制作航模,能克服制作尾部上翘,上表面略穹的硬质泡沫塑料机翼难以定型的困难。