1·The steel plate and pipe network infrastructure, but they should pay attention to the Ministry of negative reinforcement plate to prevent fall into.
板的钢筋网绑扎与基础相同，但应注意板上部的负筋，要防止被踩下。
2·Firstly, the influence of uncertainty factors about calculation model for steel plate reinforcement was summarized.
首先归纳了钢板加固计算模式不定性因素的影响。
3·Several strengthening methods, including stiffened internal ring reinforcement, collar plate reinforcement, internal plate reinforcement and chord thickness reinforcement, are introduced here.
本文介绍了几种加固方法，如内置加劲环加固、环口板加固、内置插板加固和主管壁厚加固等。
4·It is one of the main methods in bridge reinforcement that bonding steel plate or other fiber compound material is used to strengthen load-carrying capacity of weak member of Bridges.
粘贴钢板或其他纤维复合材料对梁的受拉薄弱区进行补强是桥梁加固的主要方式之一。
5·Enough clinging strength between the concrete beam and the composite plate is the key to a successful reinforcement design, and it is also a criterion for designing the bonding length of the plate.
碳纤维片材与混凝土基层间的有效粘结是确保碳纤维加固混凝土结构成功的关键，也是确定碳纤维片材粘贴搭接长度的依据。
6·The article introduces solutions adopted for foundation stabilization of basement and reinforcement of bottom plate as well as details waterproofing treatment afterwards.
介绍了地下室地基和底板的加固方案，并详细阐述了加固后的防水处理方案及施工工艺。
7·In the reinforcement experiments of right section, the influence of rc T-beam the mechanics behavior by FRP, steel plate was studied.
正截面加固试验中，分别对粘贴纤维、钢板对钢筋混凝土T梁正截面力学行为影响展开研究。
8·For plate products used in lower wing applications, increased weight savings can be achieved using selective reinforcement in DADT critical areas.
这种金属板应用于低层机翼时，在DADT这种临界领域应用选择性强化理念将会实现更多的重量节省。
9·Reinforcement type and steel plate type are the two principal forms of the vertical shearing joints of the underground diaphragm Wells by casting in place.
现浇式地下连续墙垂直接缝的二种主要抗剪形式为钢筋型、钢板型。
10·T beam reinforcement work of highway bridge is realized without interrupting traffic by adopting web-plate clamping anchorage.
采用腹板夹持锚固法，在不中断交通的状态下，完成对公路桥T型梁的加固作业。