pinion shaft

通常与齿轮配合使用。
常用释义
齿轮轴:一种用于传递动力和转动的轴,通常与齿轮配合使用。

例句

1·The pinion shaft runs in porous bronze bearing bushes.

小齿轮轴运行多孔青铜轴承衬套。

2·The differential pinions also turn with the pinion shaft.

行星齿轮也和行星齿轮轴旋转。

3·Remove the universal joint strap bolts at the pinion shaft yoke.

在小齿轮轴轴轭处拆卸万向节扣夹螺栓。

4·Since the pinion shaft is bolted to the case, it revolves with the case.

由于行星齿轮轴和变速器壳体螺栓固定,它会和变速器壳体一起旋转。

5·One on each side of the pinion shaft providing superior dynamic load capacity.

其中的每个小齿轮,提供卓越的动态负载能力轴一侧。

6·Power will go from the pinion shaft through the differential pinions to only one side gear because the other side gear is stationary.

来自行星齿轮轴的功率通过行星齿轮,只到达一个半轴齿轮,而另一个半轴齿轮保持静止。

7·Seal air is injected into the labyrinth seals located at the main motor shaft (top and bottom) and at the pinion shaft driving the motor.

密封空气被注入到主马达轴(顶部和下部)和驱动马达的齿轮轴的迷宫式密封里。

8·The situation for pinion shaft broken of increasing gear for nitrogen oxide centrifugal compressor is described. The trouble reason is analyzed.

叙述了氧化氮离心压缩机增速机小齿轮轴扭断的状况,分析了产生事故的原因。

9·If the rack is fixed and the pinion is carried in Bearings on a table guided on tracks parallel to the rack, rotation of the pinion shaft will move the table parallel to the rack.

如果齿条固定,小齿轮装在工作台的轴承上,而工作台所在的导轨与齿条平行,那么小齿轮的轴转动时,就会带动工作台平行齿条而移动。

10·Power flows through the drive pinion, ring gear, case, and pinion shaft to the differential pinions. Then power splits equally and goes to the side gears, axle shafts, and drive wheels.

功率经过主动齿轮、从动锥齿轮、壳体和行星齿轮轴来到行星齿轮,然后功率被均分,送到半轴齿轮、半轴,最后到达驱动轮。