pinch roll

夹辊:一种用于金属加工的机器
常用释义
夹辊:一种用于金属加工的机器,通过夹住金属板材来实现加工和压制。

例句

1·The distance between two centers of bottom pinch roll and mandrel;

下夹送辊中心和卷筒中心的相互位置;

2·The entry side guide of coilers aligns strips to the centerline of mills and then holds and sends them into pinch roll unit.

卷取机前侧导板的作用是把带钢对准轧制中心线送入夹送辊,并在进入夹送辊时导板夹持带钢以减少钢卷的塔形。

3·The head end of the coil will be peeled from the coil and clamped by coil opener and carried to the pinch roll of the processor.

冷轧酸洗线开卷机启卷器的作用是将原料卷的带头剥开,并将其夹持送入夹送辊和直头机。

4·Fuzzy control pinch roll control systems improved control systems qualities, and advanced the robust characteristic of control system.

将模糊控制引入到张力辊控制系统,明显地改善了系统的控制性能,尤其是大大提高了控制系统的鲁棒性。

5·The position control of side guider, pinch roll, and mandrel is very important for the whole coil area. It influences directly the success of coiling.

侧导板、夹送辊、卷筒的位置控制对整个卷取区至关重要,直接影响卷取成功与否。

6·The hydraulic pressure which hydraulic system provides to the pinch roll in CC machine should be set-up and calculated according to CC process requirement.

液压系统向连铸机升降驱动辊供给的液压压力应根据工艺要求进行设定计算。

7·The entry side guide of coilers aligns strips to the centerline of mills and then holds and sends them into pinch roll unit. By this way, the telescopicity of coils can be reduced significantly.

卷取机前侧导板的作用是把带钢对准轧制中心线送入夹送辊,并在进入夹送辊时导板夹持带钢以减少钢卷的塔形。

8·Plastic deformation is easy to occur on the surfaces of plate and strip in the roll gap of pinch mill.

在板带递送机辊缝变形区中,板带表面容易发生塑性变形。