1·High peel strength which builds on aging.
抗剥离强度高，随时间变化而变化；
2·The effect of the residual stress on the peel strength P/b is discussed.
实验结果还表明，膜内残余应力的存在降低了剥离强度。
3·Peel strength between aluminium and the grafted polyethylenes was measured .
其中酸酐功能化的聚乙烯与铝的粘结强度最高。
4·The adhesive is nontoxic and has excellent peel strength to SBS materials and leather.
所制胶粘剂对SBS材料和皮类材料具有良好的粘接效果。
5·The effect of different surface treatment on peel strength of substrate has been investigated.
研究了不同的表面处理方法对基板金属化剥离强度的影响规律。
6·Feature: Aluminum foil backing, good peel strength ANDlow tack, adaptability to weather condition ANDextreme temperatures.
特性：以纯铝箔为基材，剥离强度高、初粘性好、内聚力强、耐候性好、耐高低温性能好。
7·Feature:Aluminum foil backing, good peel strength and low tack, adaptability to weather condition and extreme temperatures.
特性：以纯铝箔为基材，剥离强度高、初粘性好、内聚力强、耐候性好、耐高低温性能好。
8·Besides, the effects of different ways of addition of the initiator BPO in the copolymerization on the peel strength are discussed.
此外，还探讨了引发剂bpo的添加方式对剥离强度的影响。
9·Strain, peel strength, critical buckling pressure and failure mode under various temperatures of PSP were investigated using experiments.
对钢丝缠绕增强塑料复合管应变、剥离强度、临界失稳压力、不同温度下的失效形式等进行了试验研究。
10·With polyether polyurethane as the main body the hot melt adhesives has good flexibility, poor adhesive peel strength and heat resistance.
以聚醚为主体的聚氨酯热熔胶虽然柔韧性得到改善，但胶黏剂的剥离强度，耐热性又较差。