1·Step 7: Edit the final XML Output stage.
步骤7：编辑最后的XML Out put阶段。
2·Output stage is a class AB to obtain the output high swing.
输出级采用了AB类推挽输出以获得高的输出摆幅。
3·In this case, the XML output stage can be used to generate XML output.
在这个例子中，可以使用XML输出stage来生成XML输出。
4·The first XML Output stage collected all the information for each account.
第一个 XML Output 阶段收集了每个帐户的所有 信息。
5·Amplifier class has absolutely nothing to do with output stage topology.
放大器级绝对没有任何关系与输出级拓扑。
6·Only those even-order harmonics generated in the output stage itself are canceled.
只有那些即使次谐波产生的输出级本身的取消。
7·Two power amplifier output stage using PMOS and NMOS transistors by the special design.
两个功率放大器的输出级均采用PMOS和NMOS晶体管特殊设计而成。
8·The final XML Output stage must generate the remaining portions of the XML document hierarchy.
最后的XML Out put阶段必须生成XML文档分层结构的其余部分。
9·A current-driven common source amplifier which is biased on class AB constitute the output stage.
由偏置在AB类的电流驱动的共源放大器构成输出级；
10·The rail-to-rail output stage maximizes the dynamic range when operating from low supply voltages.
采用低电源电压工作时，轨到轨输出级可以使动态范围达到最大。