1·Some of the testing results in the study of surface edge shapes of orientation films in Liquid Crystal Devices (LCD) by the tester are presented.
给出了该平整度仪在液晶显示器中液晶分子取向膜边缘表面轮廓形状研究方面的一些测试结果。
2·By indexing the diffraction patterns in the hypereutectic, we get the relationship of crystal orientation.
通过标定过共晶铝硅合金两相区衍射斑点指数，确定了过共晶相的取向关系。
3·The influence of the crystal orientation of the substrate on microstructure is investigated by multi layer laser cladding with the powder of nickel base superalloy.
采用镍基合金粉，研究了激光多层涂覆过程中基材晶体取向对涂层凝固组织的影响规律。
4·XRD results indicate that amorphous titanium oxide film is formed on the surface after anodic oxidation, and corrosion rates of titanium crystal vary along different crystalline orientation.
经x射线衍射分析，纯钛表面经阳极氧化处理后，其表面生成了一层非晶态的氧化钛薄膜，并且钛晶体的各个表面沿不同结晶方向的腐蚀速率不相同。
5·In Chapter IV, the article tries to discuss about the operation strategy of They Crystal in some aspects such as reader orientation.
在第四章中，本文试图从读者定位等方面探讨《晶报》的经营策略。
6·The dislocation etch pits density(EPD) of copper single wires is related with corroded time, deformative extent and crystal orientation of material.
铜单晶线材中位错蚀坑密度与材料浸蚀时间，变形量以及晶体学取向有关。
7·Orientation stability during uniaxial tension of face-centered cubic (FCC) metal sheets is predicted using a rate-sensitive crystal plasticity model.
采用速率敏感晶体塑性理论，预测了面心立方金属板材单轴拉伸过程中主要理想取向的稳定性。
8·It is always a great difficult around fabricators to cut the special orientation and prism of crystal in the cutting process.
在晶体加工中，特殊晶向及晶体棱镜的切割一直是困扰加工者的一大难题。
9·It is found that the orientation of the sheet processed by ECAR is changed and the crystal orientation evolves from (0002) basal plane orientation to coexistence of basal plane and non-basal plane.
结果表明：经等径角轧制后的板材，晶粒取向由等径角轧制前的(0002)基面取向演化为基面与非基面共存的取向。
10·The influences of crystal orientation on copper oxidation were investigated.
本文研究了具有不同晶格取向的铜的氧化特性。