1·The vectoring Angle increases with the decreasing of the nozzle pressure ratio.
减小喷管落压比可以提高矢量偏转角度。
2·N always decreases with the increase of nozzle pressure drop or orifice diameter.
随着孔径和喷嘴压降的增加，N值总是下降的。
3·Under the influences of aerodynamic force and electrostatic force, the higher the nozzle pressure and charging voltage are, the smaller the droplet diameter is.
在气动力和静电力的前后作用下，雾滴的粒径随气体压力、静电电压的增加而减小且分布愈均匀；
4·Although hose operation will affect the nozzle pressure, pump will continue to feed the listed precise pressure (don't make the pump idle and start up the cutting head at the same time).
尽管水管运行会影响喷嘴压力，泵也要持续(不能使泵空载，同时启动切割头)输送列出的精确压力。
5·Experiment methodology that measures the nozzle pressure of different molds has been proposed which proved that there existed the internal relationship between nozzle pressure and shape of cavity.
通过实验的方法测量出不同模具的喷嘴压力曲线，证实模腔几何形状与喷嘴压力之间存在确定的关系。
6·It USES a fast actuated nozzle to follow the exhaust pulse, reducing the turbine inlet area periodically to increase exhaust-gas pressure.
涡流增压器采用了一个快速响应喷头来跟踪尾气脉冲，减少内燃机的进气周期，从而增加尾气排放压力。
7·Experiments test the influences of pressure, height, nozzle aperture and frog momentum on the fire control effect of fine water mist.
实验主要通过测定压力、高度、喷头孔径的大小和雾动量对细水雾灭火效果的影响。
8·Input is simply a list of propellant ingredients, as well as chamber pressure and nozzle exit pressure.
投入，简直是名单推进剂成分，以及商会的压力和喷嘴出口的压力。
9·Nozzle core is the key part of the pressure atomization nozzle.
喷嘴芯是压力型雾化喷嘴的关键部件。
10·Proper unloader setting allows a small amount of continuous bypass (approximately 5% of total flow) to minimize the pressure spike and compensate for nozzle wear.
正确的减压器设置允许少量的连续旁路（约总流量的5%）来减少减荷器压力以及补偿喷嘴磨损。