1·At the neutral axis the principal stresses will occur at a 45 ~ Angle.
在中立轴主要重音将发生在45 ~角度。
2·Maximum shear stress generally takes place at the neutral axis of ship section.
最大剪应力通常发生在剖面的中和轴处。
3·It can be assumed that concrete below the neutral axis did not participate in resisting external moments.
它可以假设，混凝土在中立轴之下没有参加抵抗外在片刻。
4·First, by placing the concrete slab above the neutral axis of the steel, our COS Decks maximize the strengths of both steel and concrete.
首先，通过把混凝土板置于钢筋中轴之上，我们的这款桥面最大限度地加大了钢铁和混凝土的强度。
5·In the elastic region of the cross-section, the stress distribution varies linearly from the neutral axis to the beginning of the yielded area.
在界面的弹性变形区域的应力分布呈直线型，这种线性分布从截面中性轴开始到其屈服区域结束。
6·It is rather complicated to compute the neutral axis in partially pre-stressed concrete beams after cracking, since we have to solve a cubic equation.
计算部分预应力混凝土梁开裂后截面应力时，需求解中和轴高度的三次方程，使计算显得比较复杂。
7·With the help of some formulae and simple iteration procedures the table and the diagram mentioned above can also be used for locating neutral axis of t beams.
对于截面形式较复杂的T形梁，提出了有关的参数计算式，仍可利用图表，通过简单迭代过程，求得T形截面开裂后的中和轴位置。
8·This method will avoid the problem that the result is too conservative when the neutral axis lies in the top flange of the steel member as the traditional method dose...
当中性轴住于钢梁上翼缘时该方法能够给出计算简便且与试验值吻合较好的计算结果。
9·When a curved beam is bending in the plane of the curvature, the neutral axis of cross section is not identical with the axis of gravity due to the influence of the initial curvature.
由于曲率的影响，曲线梁在其曲率平面内弯曲时的中性轴不通过横截面的形心。因此弯矩在形心处要引起正应力，从而引出所谓“等效轴力”的概念。
10·Elementary Elastic bending theory requires that bending stress varies linearly with distance from the neutral axis, but plastic bending shows a more accurate and complex stress distribution.
基本弹性弯曲理论要求弯曲应力均随到中性轴的距离而线性变化，但塑性弯曲理论揭示了一个更加精确的和复杂的应力分布。