1·Our products mainly include crankshaft pulley, water pump pulley, air-conditioner pulley and electric motor pulley, tensioner pulley, damping pulley, Idler assy pulley.
曲轴皮带轮、水泵皮带轮、空调皮带轮、电机皮带轮、张紧轮、减震皮带轮及怠速轮的生产及安装。
2·LD wheel, wheel group, drum group, hook group, pulleys, couplings, wire rope, cable pulley, motor, brake, reducer, cable reel, overload limiter, standard parts.
LD车轮,车轮组,卷筒组,吊钩组,滑轮组,联轴器,钢丝绳,电缆滑车,运行电机,制动器,减速机,电缆卷筒,超载限制器,标准件。
3·In these devices, one of the shafts is typically driven by a motor or pulley, and the other shaft is driving another device.
在这些装置中,典型的情况是,一根轴由发动机或皮带轮传动,另一根轴将动力传递给其他部件。
4·Because the SL56 occupies only 0.75 inch of the motor shaft length, a brake, pulley, gear box, or coupling can also be placed on the shaft.
由于SL56仅占0.75电机轴的长度,一刹车,滑轮,齿轮箱,或耦合英寸的也可以放在轴上。
5·Belt pulley for the output shaft of a gear, gear, electric motor, and output shaft.
用于传动机构输出轴的皮带轮,传动机构,电动机和输出轴。
6·Drive by some of the main motor, a small pulley, the electrical component stent and Triangle.
传动部分主要由电机、小皮带轮、电机支架及三角带组成。
7·Main drive: the belt pulley is driven by motor (4KW 960rpm).
主传动:由电机驱动皮带轮。
8·The dynamic force of the motor is transmitted to a cutter through a belt pulley, a separator and the driving flexible shaft.
发动机的动力通过皮带轮、离开器、传动软轴转向切割器。
9·The structure can convert the rotation of a drive belt pulley into the plane curve movement of the pivot bolt, realize motor driving of the stapler and ensure the stapling strength and quality.
采用这样的结构后,可以实现将主动带轮的转动转变为枢轴螺栓的平面曲线运动,实现订扣机的电机驱动,保证订扣力度和订扣质量。
10·When the belts have been located in the belt pulley grooves, moves the drive motor away from the driven shaft so that uniform teensioning of the belts is achieved.
在安装新皮带时,要用手动的方式使电机向驱动轴移动而使所有皮带均处于滑轮槽内。