1·The graft copolymerization of natural rubber(NR) and polar monomer maleic anhydride (MAH)in the presence of oxygen has been studied in toluene solution.
采用溶液法,选用极性单体马来酸酐(MAH),在非隔氧条件下,以过氧化苯甲酰( BPO)为引发剂对天然橡胶(NR)进行接枝改性。
2·In a preferred embodiment, the binder composition includes an ethylene-maleic acid copolymer formed by the hydrolysis of an ethylene maleic anhydride copolymer.
在优选的实施方案中,粘合剂组合物包括由水解乙烯马来酸酐共聚物形成的乙烯-马来酸共聚物。
3·The graft recipe of maleic anhydride (MAH) onto PP was studied, and the decomposition inhibition method on PP radical during grafting reaction process was explored.
研究了聚丙烯(PP)与马来酸酐(MAH)的接枝配方; 并且探索了接枝反应过程中PP自由基的降解抑制方法。
4·Furthermore, it was showed that maleic anhydride and styrene grafted the main chain of PVC, and then reaction with isocyanate formed cross-linked structure by FTIR.
此外,通过红外表征测试表明交联PVC是通过马来酸酐和苯乙烯接枝到PV C主链上,然后与亚甲基二苯胺发生反应产生交联结构。
5·The effect of the emulsifier styrene maleic anhydride copolymer(SMA) on the emulsification and encapsulation of melamine formaldehyde resin microcapsule was studied.
以苯乙烯马来酸酐的共聚物树脂作为保护胶体,研究了其对原位聚合法形成蜜胺甲醛树脂微胶囊的乳化和成囊的作用机理。
6·The effect of the emulsifier styrene maleic anhydride copolymer (SMA) on the emulsification and encapsulation of melamine formaldehyde resin microcapsule was studied.
以苯乙烯马来酸酐的共聚物树脂作为乳化剂,研究了其对形成蜜胺甲醛树脂微胶囊的乳化和成囊的作用机理。
7·The convenient adhesive with good properties for polypropylene foam material was prepared here, based on graft polymer from chlorinated polyethylene and maleic anhydride.
以氯化聚乙烯接枝马来酸酐的接枝物为基料,制得性能优良,使用方便的聚丙烯发泡材料用粘合剂。
8·The preparation process of maleic anhydride grafted polypropylene (PPg-MAH) was studied by reactive extrusion using a twin screw extruder system and infrared spectroscopy.
利用反应挤出技术和红外光谱分析方法,对马来酸酐(MAH)接枝聚丙烯(PP)的制备工艺进行了研究。
9·The media hazards, process hazard and installation hazard are analyzed in this paper. The technological measures of safe control for maleic anhydride are also put forward.
对马来酸酐生产过程中的介质危险、过程危险及装置危险进行了分析,提出了马来酸酐装置安全控制技术措施。
10·Maleic anhydride is grafted on to the ABS with the aid of single screw extruder - the fluidity, thermal properties and mechanical behavior of modified ABS are also discussed.
介绍以单螺杆挤出机进行马来酸酐接枝改性abs,对接枝改性abs的流动性、热性能和力学性能进行了探讨。