1·It also introduces the machined surface quality using PCBN cutting tool.
同时也介绍了PCBN刀具的加工表面质量。
2·Workpiece burn is an important factor to damage machined surface quality.
磨削烧伤是影响已加工表面质量的重要因素。
3·The quality of the machined surface obtained by up milling is not very high.
通过逆铣所得机加工表面质量不是很高。
4·The machined surface texture and roughness of composites reinforced by fiber are closely.
纤维增强复合材料的切削加工表面结构和粗糙度与切削方向密切相关。
5·Machined surface topographies are carriers for fabrication process and functional information.
机械加工表面形貌是加工工艺信息和零件功能信息的载体。
6·First, the two most common used methods adopted in machined surface assessment are summarized.
首先,总结归纳了机械加工表面评定中广泛采用的两类方法。
7·Depth of cut, d, is the normal distance between the unmachined surface and the machined surface.
切削深度d是未加工面与已加工面之间的垂直距离。
8·It is further shown that the cutting direction has a remarkable effect on the machined surface quality.
进一步指出,当切削方向背离破坏区扩展方向时,能得到较好的已加工表面质量。
9·The formula of straightness error of the machined surface was also founded through geometrical analysis.
通过几何分析,建立了加工表面的直线度公式。
10·The machined surface of zirconia toughened mullite obtained by grinding, honing and flat-top honing were studied.
本文应用表面粗糙度参数和磨损率,研究增韧莫来石材料磨削、珩磨及平顶珩磨表面的耐磨性能。