lead in wire

引入线:指用于将电信号或电力信号引入到设备或系统中的导线。
常用释义
引入线:指用于将电信号或电力信号引入到设备或系统中的导线。

例句

1·The temperature sensors, start switch S1, and current control potentiometer are all connected to the board using servo lead wire (available at many hobby shops in 10 foot lengths).

温度传感器,启动开关s1的,和电流控制电位器都连接到局用伺服引线(可在许多商店的嗜好,在10英尺长度)。

2·The cooling process of 0.70% carbon steel wires upon patenting in lead bath and CMC (Carboxyl Methyl Cellulose) aqueous solutions was measured respectively with the steel wire probes.

利用钢丝探头分别测量了含碳0.70%的钢丝在铅浴和CM C水溶液中的冷却过程。

3·The length of lead wire of the temperature sensor shall depend on location of the senor as provided in the corresponding data sheet.

温度传感器引线的长度应根据相应的数据单中提供的传感器安装位置来确定。

4·Ultrasonic aluminum wire bonder and ultrasonic gold wire bonder are mainly applied to joint the chip pad with the lead-frame in the later process of semiconductor producing.

超声铝丝焊接机和超声金丝球焊接机主要运用于半导体生产后工序中芯片焊盘与外框架间引线的焊接。

5·Objective To evaluate the value of single straight stainless wire technique in the implantation of ventricular pacing electrode lead.

目的评价单根直钢丝技术在置入心室起搏电极操作中的价值。

6·Copper wire color (dark red or white) : continuous annealing in the work period of the line burn soft and pass cooling section after cooling can achieve lead not hot, without water.

铜线变色(暗红或发白):连续退火在工作段把线烧软,还要经过冷却段冷却后才能达到引出线不烫、不带水。

7·The conductive loop partial overheat fault caused by improper design and installation of the through lead wire in transformer bushing is analyzed. The preventive measures are presented.

分析了因变压器套管穿芯引线设计及安装不合理导致的导电回路局部过热性故障,提出了防范措施。

8·When exogenous noise is applied to the ground wire of a thin film magnetic head, crosstalk noise occurs in a lead line and a ground lines located near the ground wire.

当外来噪声施加到薄膜磁头的接地导线上时,交扰噪声出现在引 线和布置在接地导线附近的地线中。

9·This products select quality galvanized lead wire, through automation, precision wove, also using metal plates stretching, punching, it is used in the microphone audio equipment.

该产品选用优质镀锌铅丝,通过自动化、精密准确编织制成,亦有采用金属板拉伸、冲孔而成,用于做麦克风网、音响设备。

10·Based on a 3 wire platinum resistor measuring circuit, in which the lead wire resistance can be compensated, a high precise temperature measuring method is stated.

基于可补偿引线电阻影响的三线制铂电阻测量电路提出了一种高精度测温方法。

同义词

引入线