1·The researchers are trying to replace the indium oxide with cheaper oxides like aluminum oxide, which possesses similar properties.
研究人员们正在试图用具有类似性质的、较为便宜的氧化物像氧化铝来取代氧化铟。
2·This article presents acid could be used to wash the indium bumps before flip chip bonding, based on indium oxide dissolved in acid.
利用氧化铟易于溶于酸性溶液的性质，提出了在倒装焊接之前使用酸性溶液对铟柱进行酸洗。
3·Tin doped indium oxide (ITO) films were deposited on glass substrates by reactive magnetron sputtering using a metallic alloy target (in Sn, 90 10).
采用铟锡合金靶(铟锡，90 - 10)，通过直流反应磁控溅射在玻璃基片上制备出ito薄膜，并在大气环境下高温退火处理。
4·Zinc oxide thin films were prepared by pulsed laser deposition (PLD) on glass substrates coated with tin-doped indium oxide (ITO) thin films in this paper.
本文采用射频辅助脉冲激光沉积(PLD)系统，在镀有透明导电膜氧化锡铟(ito)的玻璃衬底上制备了氧化锌薄膜。
5·Transparent conductive, tungsten-doped indium oxide(IWO) films with the high carrier molbility were grown by magnetron sputtering on glass substrates, followed by in-situ annealing.
采用直流磁控溅射法在清洁玻璃基片上制备了掺钨氧化铟（IWO）透明导电氧化物薄膜。
6·Especially, the battery with electrolyte saturated by zinc oxide and indium oxide shows excellent charging-discharging performance and charge retention capacity as well as its cycle life.
在电解液中同时添加氧化铟和氧化锌可提高电池的充放电效率和荷电保持能力，电池的循环寿命也得到提高。
7·With the traditional tin indium oxide transparent electrode replaced by the zinc oxide transparent electrode of the invention, the manufacturing process is simplified and cost is lowered.
采用本发明的氧化锌透明电极取代传统的氧化铟锡透明电极，简化了制备工艺，降低了成本。
8·One is indium tin oxide.
一种是氧化锡铟。
9·Conductors of electricity on solar panels ideally must be transparent and highly conductive. One solution currently used is indium tin oxide (ITO); however, ITO is very expensive.
对太阳能电池板而言，电池面板内部的导体元件必须采用既透明，电导率又高的材料进行制作，目前用来制作这种导体元件的材料主要是铟和锡元素的氧化物 （ITO），不过ITO材料非常昂贵。
10·The design principles of indium tin oxide film (ITO) applied to antistatic for optical solar reflector (OSR) have been studied.
对氧化铟锡(ito)薄膜在光学太阳反射镜(osr)抗静电放电设计中的应用进行了研究。