1·The properties required for the coating material was analyzed according to the working conditions of KR desulfurizing hot metal ladle.
根据KR搅拌脱硫铁水罐的实际工作条件，分析了渣线防粘渣涂料的性能要求。
2·The refractory material, masonry technique and baking schedule of hot metal ladle lining are improved under practical production conditions.
在实际生产条件下，对铁水罐衬的耐火材料、铁水罐衬的砌筑工艺、烘烤制度进行了改进。
3·Technical measures of sampling in hot metal ladle and design of sampler were introduced under the tight transportation condition at Panzhihua Steel Company.
介绍了攀钢现有运输条件十分紧张的情况下，在铁水罐中取样所采取的技术措施，取样机的设计思路。
4·For hot metal desulphurization by powder injection, mixing time, residence time and powder penetration ratio are the three basic parameters which determine desulphurization efficiency in ladle.
熔池均混时间、粉剂穿透比和粉剂停留时间是决定铁水包喷粉脱硫效率的三个基本参数。
5·The features of different baking methods are evaluated so that the gas regenerator is used for baking the ladle for hot metal.
通过比较几种烘烤方案的特点，提出了采用高炉煤气蓄热式烘烤铁水罐。
6·The flow field of hot metal in the eccentric bottom-blown argon ladle has been simulated and the main characteristics of the flow field were analyzed.
模拟研究了偏心底吹氩钢包内钢液流场，并分析了该流场的主要特点。
7·The influences of nozzle design and position of injection lance on the mixing time of hot metal in the ladle were experimentally investigated.
通过实验考察了喷枪喷嘴结构不同和喷枪平面位置不同条件下吹气对熔池搅拌的影响；
8·The hot-metal ladle car possesses small space usage, a compact structure and reliable working.
本铁水罐车占用空间小、结构紧凑、工作可靠。
9·Dust collecting unit shall work for dedusting of the tap hole and the outlet of the hot-metal ladle.
集尘单位工作，应为除尘的水龙头孔和插座的热点-金属包。