1·For box girder structure which is applied extensively in bridge construction, the traditional analysis method of load is of comparatively bigger error.
由于箱梁结构广泛应用于桥梁建设中，而传统的受力分析方法存有较大的误差。
2·The experiment makes the effectual vibration active control of the intellective girder structure by means of direct negative feedback and tendency forecasting fee…
实验中采用直接负反馈和趋势预测反馈控制方法，对智能梁结构进行了有效的振动主动控制，得到了良好的效果。
3·Spatial bearing performance characteristic of irregular girder structure in the multi-strand ramp interjections of the urban overpasses is researched in this paper.
研究了城市立交桥多股匝道交汇处的异形梁结构的空间受力特性。
4·The diving chamber is a watertight compartment with air pipes, the lifting support is a girder structure, and the lead rails are arranged under and below the lifting support;
潜水舱是带有通气管的水密舱，升降支架为桁 架结构，升降支架的上下设有导轨。
5·The curved beam finite element method, which is based on the theory of curved girder structure analysis, has been adopted for analyzing the curved bridge structure in this Paper.
本文根据曲线梁桥的结构分析理论，采用曲杆有限元法对曲线梁桥进行结构分析。
6·Combining with an engineering instance, basing on the current specifications and a certain construction, the transfer girder structure is analyzed by the method of finite element.
根据现有规范规定，结合工程实例，本文提出了钢骨转换梁与上部剪力墙共同作用的结构的截面极限承载力的计算方法；
7·A ship's hull is a box girder structure composed of stiffened panels and therefore, strength of stiffened panels plays a significant role for the ultimate strength analysis of ship structures.
船体是一个由加筋板格组成的箱形结构，加筋板格的强度计算对于船体结构的极限强度分析极为重要。
8·Underwater placement of bridge's platform and cradle construction method for multi-span continuous box-girder structure constitute the construction feature of Fuyang bridge in Zhejiang province.
以水下浇筑大桥承台和采用挂篮法施工多跨连续箱梁结构是浙江富阳大桥工程的重头戏。
9·Out-laid anchor heads are used for suspension Bridges mostly because they have the advantages such as attractive in appearance, not weakening arch and girder structure connected, and easy to install.
外置式锚头多用于悬索桥，具有造型美观，不削弱被连接的拱、梁结构，施工安装方便等优点。
10·The box type structure, cavity cannot antirust paint corrosion, in order to prevent moisture intrusion corrosion beam cavity, sealing the inner cavity of the main girder must keep.
箱型结构的主梁，内腔无法涂漆防锈蚀，为了防止水汽侵入腐蚀主梁内腔，必须保住主梁内腔的密封性。