1·Used for down hand welding and flat fillet welding on general low-carbon steel structures…
适用于船体结构低碳钢和其他相应等级的普通低碳钢的平焊、平角焊。
2·Non-watertight weld joints and fillet welding for stiffening member shall be painted after block inspection.
加强构件的非水密焊接接合和填角焊应该在检查完分段后进行喷漆。
3·At last, the fatigue crack in the experiment and the main influential factor of fatigue strength of fillet welding seam was studied.
最后，对疲劳试验中有关裂纹以及影响焊缝疲劳强度的主要原因进行了探讨。
4·The strength of fillet welding joint is related not only to the fillet weld size, but also depends on the base metal strength matching.
角焊缝的强度不仅与焊脚尺寸有关，还取决于焊缝金属与母材强度的匹配。
5·According to the actual situation of Guangdong province township shipyard, Introduction to butt welding and fillet welding procedure approval process and technical standards and the note.
结合广东省乡镇船厂实际，介绍钢板对接焊和角接焊的焊接工艺认可流程、技术标准和有关注意事项。
6·The fillet welds have been accomplished according to requirements of leg-connection welding, but now, acceptance check on them is based on requirements of full penetration fillet welding…
角焊缝我们按贴脚焊缝生产完毕，如今却按角焊缝融透要求来验收，…
7·Once the proper alignments and angles have been achieved, the cross-members are ready for welding. A solid fillet should be welded around the entire circumference of each cross-member tube.
一旦正确的路线和角度已经实现，交叉成员焊接准备。一个坚实的鱼片应该管焊接周围人的整个圆周每个交叉。
8·And the welding connecting of them are advised to use slope butt weld that are fully welded, but when the double-sided fillet weld is used, they should be design on equal strength.
节点中的焊接宜采用完全焊透的坡口对接焊缝连接，当采用双面角焊缝连接时，可按等强设计。
9·Weld-shape(butt weld width, size of fillet weld)is an indicator of weld features and it also is an important factor of quality welding.
焊缝尺寸 （如对接焊缝的焊缝宽度、角焊缝的焊角尺寸等 ）是表示焊缝形状特征的指标 ，是影响焊缝质量的重要因素之一。
10·This paper briefs the fractures of fillet weld of manhole reinforcing plate in react ion tower of thermal cracking plant and its repairing welding.
本文简要介绍了热裂化装置反应塔入孔加强板角焊缝的断裂及其补焊情况。