fillet weld

角焊缝:一种大约三角形横截面的焊缝
常用释义
角焊缝:一种大约三角形横截面的焊缝,用于连接两个垂直的零件。

例句

1·Seal welds shall be welded with half the thickness of the carrying fillet weld.

密封焊道应焊成现填角焊缝厚度的一半。

2·The weld can be divided into four types: butt weld, fillet weld, plug weld and end weld.

焊缝可分为对接焊缝、角焊缝、塞焊缝和端接焊缝四种。

3·An automatic CO2 welding device for elbow pipe and flange fillet weld joint is introduced in the paper.

介绍一种弯管和法兰角接接头填角焊的自动焊接装置。

4·Non-watertight weld joints and fillet welding for stiffening member shall be painted after block inspection.

加强构件的非水密焊接接合和填角焊应该在检查完分段后进行喷漆。

5·The basic stress of T-fillet weld is analyzed, the safe measures for it in design, welding and corrosion control are presented.

分析了T形角焊缝部位的基本受力状况,对该部位容易出现的问题进行了分析,从设计、焊接、防腐等方面提出了应对措施。

6·Weld-shape(butt weld width, size of fillet weld)is an indicator of weld features and it also is an important factor of quality welding.

焊缝尺寸 (如对接焊缝的焊缝宽度、角焊缝的焊角尺寸等 )是表示焊缝形状特征的指标 ,是影响焊缝质量的重要因素之一。

7·The strength of fillet welding joint is related not only to the fillet weld size, but also depends on the base metal strength matching.

角焊缝的强度不仅与焊脚尺寸有关,还取决于焊缝金属与母材强度的匹配。

8·Value of torsion for less than the size of fillet weld height of small-opening fillet weld is the same as that of corresponding closed fillet weld.

具有不大于焊脚尺寸的小开口焊缝,其所能承受的扭矩与相应闭合角焊缝所能承受的扭矩是几乎相同的。

9·This paper briefs the fractures of fillet weld of manhole reinforcing plate in react ion tower of thermal cracking plant and its repairing welding.

本文简要介绍了热裂化装置反应塔入孔加强板角焊缝的断裂及其补焊情况。

10·For the T-fillet weld, there are high stress, difficult to weld, more defects and easy to be corroded in vertical oil tank, which is often neglected.

大型立式油罐t形角焊缝部位应力高,施工难度大,焊缝存在缺陷多,容易受到腐蚀,而且常被忽视。