1·The feasibility of the joint hot extrusion forming was put forth.
提出了虎克式万向节热挤压成型的可行性。
2·Study of flowing law of metal in extrusion forming process for tube;
提出了使用通用有限元程序进行结构分析时套筒连接件的处理方法 。
3·The paper makes some studies on extrusion forming technology of two-cup part.
本文就双杯形件挤压成形工艺进行了研究。
4·The metal flow rule of extrusion forming is expounded by velocity vector chart.
并利用速度矢量图阐述了挤压成形时金属的流动规律。
5·The forming of hollow steps shaped part by the extrusion forming process is a difficult problem.
挤压后的零件不易脱模是多台阶空心零件在挤压成形工艺中的难点。
6·This equipment is mainly applied to the cold extrusion forming of thin-walled tubes or annealing of metal tube coated curing.
本设备主要适用于经冷挤压成形的薄壁铝管退火或金属管内涂液固化。
7·As the important parts of continuous extrusion forming, validation of forming load on tool and die is the key of their design.
作为连续挤压成形零件的模具、挤压轮及堵头所受的成形力分析是其进行结构设计的关键。
8·The extrusion forming process is applied to the processing of automobile hubs, especially the processing of hubs of compact cars.
本发明非常适合在汽车轮毂，特别是小型汽车轮 毂加工时使用。
9·Basal experimental data and theory analysis are foundations for further research on Multi-Core -line-die Powder Extrusion Forming.
实验研究所获得的基础数据和理论分析，为“多芯线粉末挤压”的进一步研究奠定了基础。
10·The working process, structure and control system of a three-dimensional manipulating robot for cold extrusion forming of metal have been introduced.
介绍了用于金属冷挤压成形的三维操作机器人的工作过程、结构与控制系统。