1·In addition, I add epoxy adhesive.
此外，我添加环氧树脂胶粘剂。
2·The corrosion resistance of epoxy adhesive was assessed by its tensile shear strength.
环氧胶粘剂的耐蚀性能是通过测定其拉伸剪切强度来评定的。
3·The specimens were made from two glass arms joined with a0.005-in. layer of epoxy adhesive.
制作的试样是把两块玻璃臂用0。005时厚环氧粘合剂涂层胶合成的。
4·The compounding of the underwater epoxy adhesive cured with cyanamide is given in this paper.
本文给出一种以氰基胺固化的水下环氧胶粘剂的配方。
5·Study on preparation and properties of heat-resistant epoxy adhesive cured at room temperature;
本文利用空间环境效应地面模拟设备对环氧结构胶粘剂进行了真空热循环试验。
6·The results show that: The effect of reinforced materials modified epoxy adhesive is remarkable.
研究结果表明：增强材料对环氧胶粘剂的改性效果显著。
7·As for the epoxy adhesive, there was little difference before and after acetone surface treatment.
而对于环氧树脂胶合试件来说，丙酮表面处理处理前后压缩剪切强度的差异不大。
8·The reason for reduction of bonding performance of epoxy bonded joint was the degradation of epoxy adhesive.
胶粘剂分子链的降解是环氧胶接接头胶接性能降低的主要原因。
9·The water-absorbing material can play the role of improving the bonding strength of the epoxy adhesive in water.
吸水性材料对水下环氧胶粘剂的粘接强度起增强的作用。
10·With hardener K-35 forms heat curing epoxy adhesive characterized by outstanding mechanical strength even at 120 deg c.
与K - 35固化剂组合，形成热固化胶粘剂，即使120度也能保持很高的机械强度。