1·This text on the basis of studying both at home and abroad, go on research on ultimate load capacity of reinforced concrete beam by layered F. e.
本文在国内外研究的基础上,采用分层有限元法对钢筋混凝土梁的极限承载力进行了研究。
2·E-beam tools are used in photomask writing, but many believe the technology will never be fast enough for high-volume semiconductor lithography.
因此目前电子束光刻设备主要的用途是用于刻制掩膜板,许多人甚至认为电子束光刻技术的产出量永远也无法满足芯片量产的需求。
3·Sea Bat 7125-e - High resolution multi beam sonar, the S410 Deepwater hydrographic and broadband echosounder, and the PDS2000 Software package.
“海上蝙蝠”(Sean Bat) 7125 - E高精度多波束声纳,S410深水水道测量和宽带回波器,PDS2000软件包。
4·The long pulse electron beam system reported here was constructed for transverse pumping and e-beam sustained discharge large energy gas laser.
本文介绍的长脉冲大面积强流电子束系统是为横向泵浦和控制放电泵浦大能量气体激光而设计和研制的。
5·The results demonstrate that dynamic e-beam evaporation technology is an effective method for preparing excellent ITO transparent conducting film.
实验结果和理论分析表明,动态变化的电子束蒸发工艺是制备优质ito透明导电膜的有效方法。
6·This paper presents a kind of data conversion software used in the variable-shaped e-beam lithography, especially on its composition, working theory and working procedure.
本文简要介绍了一种矩形电子束曝光机图形转换软件的结构、工作原理和工作过程。
7·The paper studies nonlinear F. E. analysis of stiffened shells, presenting beam element to simulate the stiffeners.
本文研究了加劲壳的非线性有限元分析方法,提出了一种梁元素来模拟加筋。
8·Individual sodium titanate nanowire-based device is fabricated via e-beam lithography techniques.
利用电子束光刻技术制作了基于钛酸钠纳米线的纳米器件。
9·A compact output switch for a water pulse forming line (PFL) e-beam accelerator was designed.
介绍了一种水介质脉冲形成线强流电子束加速器的输出开关的设计和实验结果。
10·There are mainly three methods in the second system stress analysis of the orthotropic steel deck, P-E method, the equivalent girder beam method and the FEM.
薄壁钢扁平箱梁正交异性板钢桥面系第二体系应力的计算方法主要有P - E法、等效格子梁法和有限元法等。